URLS Calculated size of `./xen-baremetal-work/img': 1048576 bytes, 5 inodes Extent size set to 8192 ./xen-baremetal-work/img: 1.0MB (2048 sectors) block size 8192, fragment size 1024 using 1 cylinder groups of 1.00MB, 128 blks, 64 inodes. super-block backups (for fsck -b #) at: 32, Populating `./xen-baremetal-work/img' Image `./xen-baremetal-work/img' complete This is anita version 1.40 Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot-com1.fs... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot2.fs... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot3.fs... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot4.fs... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot5.fs... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/cdrom/boot-com.iso... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/kern-GENERIC.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/modules.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/base.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/etc.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/comp.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/man.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/tests.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/text.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/xbase.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/xcomp.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/xetc.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/xfont.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/sets/xserver.tgz... OK makefs -t cd9660 -o rockridge ./xen-baremetal-work/install_tmp.iso ./xen-baremetal-work/download/ sudo noemu \ --workdir \ ./xen-baremetal-work \ --releasedir \ ./xen-baremetal-work/download \ --arch \ amd64 \ --boot-from \ net \ --conf \ ../noemu.conf noemu arguments: ['/usr/local/bin/noemu', '--workdir', './xen-baremetal-work', '--releasedir', './xen-baremetal-work/download', '--arch', 'amd64', '--boot-from', 'net', '--conf', '../noemu.conf'] boot_from: net workdir: ./xen-baremetal-work tftpdir: /home/gson/anita/xen-tests/xen-baremetal-work service ['/usr/pkg/sbin/dhcpd', '-d', '-f', '-cf', './xen-baremetal-work/dhcpd.conf', '-lf', './xen-baremetal-work/dhcpd.leases', 're0'] pid 19781 service ['/usr/sbin/inetd', '-d', './xen-baremetal-work/inetd.conf'] pid 25247 ilo3_power True power on status=0 status_tag=COMMAND COMPLETED Sat Apr 1 04:58:45 2017 Server powering on ....... connected >> NetBSD/x86 PXE boot, Revision 5.1 (from NetBSD 6.1.5) >> Memory: 552/3668992 k Press return to boot now, any other key for boot menu booting netbsd - starting in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. PXE BIOS Version 2.1 Using PCI device at bus 3 device 0 function 0 Ethernet address e4:11:5b:d3:13:fc |11234416/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+5724248/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+625672\=0x11c5b30 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1.5 (INSTALL) total memory = 49141 MB avail memory = 47698 MB mainbus0 (root) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110623/tbfadt-638) ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110623/tbfadt-638) cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu1 at mainbus0 apid 32: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu2 at mainbus0 apid 16: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu3 at mainbus0 apid 48: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu4 at mainbus0 apid 4: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu5 at mainbus0 apid 36: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu6 at mainbus0 apid 20: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu7 at mainbus0 apid 52: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu8 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu9 at mainbus0 apid 34: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu10 at mainbus0 apid 18: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu11 at mainbus0 apid 50: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu12 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu13 at mainbus0 apid 33: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu14 at mainbus0 apid 17: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu15 at mainbus0 apid 49: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu16 at mainbus0 apid 5: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu17 at mainbus0 apid 37: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu18 at mainbus0 apid 21: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu19 at mainbus0 apid 53: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu20 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu21 at mainbus0 apid 35: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu22 at mainbus0 apid 19: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu23 at mainbus0 apid 51: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 ioapic0 at mainbus0 apid 8 ioapic1 at mainbus0 apid 0 acpi0 at mainbus0: Intel ACPICA 20110623 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) MOMB (PNP0C02) at acpi0 not configured MI0 (IPI0001) at acpi0 not configured attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (BEEP, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 COMA (PNP0501) at acpi0 not configured PMI0 (ACPI000D) at acpi0 not configured acpitz0 at acpi0 (THM0): cpu0 attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13) ppb0: PCI Express 2.0 pci1 at ppb0 bus 5 ciss0 at pci1 dev 0 function 0: HP Smart Array 11 ciss0: interrupting at ioapic1 pin 4 ciss0: 1 LD, HW rev 2, FW 5.14/5.14 scsibus0 at ciss0: 1 target, 1 lun per target ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13) ppb1: PCI Express 2.0 pci2 at ppb1 bus 12 ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13) ppb2: PCI Express 2.0 pci3 at ppb2 bus 9 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13) ppb3: PCI Express 2.0 pci4 at ppb3 bus 13 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13) ppb4: PCI Express 2.0 pci5 at ppb4 bus 14 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13) ppb5: PCI Express 2.0 pci6 at ppb5 bus 15 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13) ppb6: PCI Express 2.0 pci7 at ppb6 bus 3 bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx0: Ethernet address e4:11:5b:d3:13:fc bnx0: interrupting at ioapic1 pin 6 brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx1: Ethernet address e4:11:5b:d3:13:fe bnx1: interrupting at ioapic1 pin 13 brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13) ppb7: PCI Express 2.0 pci8 at ppb7 bus 4 bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx2: Ethernet address e4:11:5b:d3:13:a4 bnx2: interrupting at ioapic1 pin 7 brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx3: Ethernet address e4:11:5b:d3:13:a6 bnx3: interrupting at ioapic1 pin 15 brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13) ppb8: PCI Express 2.0 pci9 at ppb8 bus 6 ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13) ppb9: PCI Express 2.0 pci10 at ppb9 bus 16 pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13) pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13) pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13) pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13) pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13) pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13) pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13) pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13) pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13) pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13) pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13) pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13) vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at pci0 dev 20 function 1 not configured vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00) ppb10: PCI Express 1.0 pci11 at ppb10 bus 17 ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00) ppb11: PCI Express 1.0 pci12 at ppb11 bus 2 vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01) uhci0: interrupting at ioapic0 pin 17 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00) uhci1: interrupting at ioapic0 pin 20 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00) uhci2: interrupting at ioapic0 pin 23 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00) uhci3: interrupting at ioapic0 pin 22 usb3 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00) uhci4: interrupting at ioapic0 pin 23 usb4 at uhci4: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00) ehci0: interrupting at ioapic0 pin 20 ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4 usb5 at ehci0: USB revision 2.0 ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90) pci13 at ppb12 bus 1 vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 pckbd_enable: command error drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00) ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo acpicpu0 at cpu0: ACPI CPU coretemp0 at cpu0: thermal sensor, 1 C resolution acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution acpicpu4 at cpu4: ACPI CPU coretemp4 at cpu4: thermal sensor, 1 C resolution acpicpu5 at cpu5: ACPI CPU coretemp5 at cpu5: thermal sensor, 1 C resolution acpicpu6 at cpu6: ACPI CPU coretemp6 at cpu6: thermal sensor, 1 C resolution acpicpu7 at cpu7: ACPI CPU coretemp7 at cpu7: thermal sensor, 1 C resolution acpicpu8 at cpu8: ACPI CPU coretemp8 at cpu8: thermal sensor, 1 C resolution acpicpu9 at cpu9: ACPI CPU coretemp9 at cpu9: thermal sensor, 1 C resolution acpicpu10 at cpu10: ACPI CPU coretemp10 at cpu10: thermal sensor, 1 C resolution acpicpu11 at cpu11: ACPI CPU coretemp11 at cpu11: thermal sensor, 1 C resolution acpicpu12 at cpu12: ACPI CPU acpicpu13 at cpu13: ACPI CPU acpicpu14 at cpu14: ACPI CPU acpicpu15 at cpu15: ACPI CPU acpicpu16 at cpu16: ACPI CPU acpicpu17 at cpu17: ACPI CPU acpicpu18 at cpu18: ACPI CPU acpicpu19 at cpu19: ACPI CPU acpicpu20 at cpu20: ACPI CPU acpicpu21 at cpu21: ACPI CPU acpicpu22 at cpu22: ACPI CPU acpicpu23 at cpu23: ACPI CPU scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors sd0: async, 8-bit transfers, tagged queueing ugen0 at uhub0 port 2 ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2 uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture boot device: bnx0 root on md0a dumps on md0b root file system type: ffs warning: no /dev/console Created tmpfs /dwskbd1: detached ukbd0: detached uhidev0: detached uhidev0: at uhub1 port 1 (addr 2) disconnected wsmouse1: detached ums0: detached uhidev1: detached uhidev1: at uhub1 port 1 (addr 2) disconnected ev (1458176 byte, 2816 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                         NetBSD/amd64 6.1.5 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqquhidev0 at uhub1 port 1 configuration 1 interface 0 qqqqqqqqqqqqqqqquhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 qqqqqqqqqqqqqqqkukbd0 at uhidev0 (B(0x(B>a: Installation messages in English[14;63 H(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqwskbd1 at ukbd0 mux 1 uhidev1 at uhub1 port 1 configuration 1 interface 1 qqqqqqqqqqqqqqqquhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 qqqqqqqqj(Bms0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 14;18H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Keyboard type(0x (B(0x(B(0x(B(0x(B>a: unchanged(0x(B(0x(B b: US-English(0x(B(0x(B c: UK-English(0x(B(0x(B d: Belgian(0x(B(0x(B e: Czech(0x(B(0x(B f: Danish(0x(B(0x(B g: Dutch(0x(B(0x(B h: Finnish(0x(B(0x(B i: French(0x(B(0x(B j: German(0x(B(0x(B k: Greek(0x(B(0x(B <: page up, >: page down (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B(0 (B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-6.1.5 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yesb [18;48H(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes       I found only one disk, sd0 (279G, HP LOGICAL VOLUME). Therefore I assume you want to install NetBSD on it. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x( B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are not needed by all installations. You may choose to install a core set (Minimal installation), all of them (Full installation) or you select from the optional distribution sets. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation d (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel ModulesYes c: BaseYes d: System (/etc)Yes e: Compiler ToolsNo f: GamesNo g: Online Manual PagesNo h: MiscellaneousNo i: Test programsNo j: Text Processing ToolsNo k: X11 setsNone l: Source setsNone >x: Install selected se g i j k ets>e: Compiler Tools No x: Install selected setsYes e: Compiler Tools Yes >g: Online Manual Pages NoYes g: Online Manual Pages Yes >i: Test programs NoYes i: Test programs Yes >j: Text Processing Tools NoYes j: Text Processing Tools Yes >k: X11 sets None(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Insa b c d e x l tall selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B>a: X11 base and clients No x: Install selected setsYes a: X11 base and clients Yes>b: X11 programming NoYes b: X11 programming Yes>c: X11 configuration NoYes c: X11 configuration Yes>d: X11 fonts NoYes d: X11 fonts Yes>e: X11 servers NoYes e: X11 servers Yes>x: Install selected sets Noges Yes No YesTools Yes All None sets k: X11 sets All >l: Source sets None(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected setsx x (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Noges Yes No YesTools Yes All None sets l: Source sets None >x: Install selected setsis disk matches the following BIOS disk:              BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80 1024 255 32 585871964 299  Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: This is the correct geometry (0x(B(0x(B b: Set the geometry by hand (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B We are now going to install NetBSD on the disk sd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions.  If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD.  A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself.  (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Which would you like to do? (0x(B(0x(B(0x(B(0x(B>a: Edit the MBR partition table(0x(B(0x(B b: Use the entire disk(0x(B 21;23H(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Edit the MBR partition table>b: Use the entire disk Do you want to update the bootcode in the Master Boot Record to the latest version of the NetBSD bootcode?          (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: Yes [14;48H(0x(B(0x(B b: No(0x(B(0mqqqqqqqqqqqqqqqj(B NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 286070 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0a x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system, however you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories).  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem > 98371(236926) 22573 201464025 + / 4914411277 100647225 swap000 /tmp (tmpfs)000 /usr000 /var000 /home Add a user defined partition Change input units (sectors/cylinders/MB) Accept partition sizes. Free space 138555 M B, 12 free partitions. 98371(236926) 22573 201464025 + / > 49144 11277 100647225 swap 49144 11277 100647225 swap > 0 0 0 /tmp (tmpfs) 0 0 0 /tmp (tmpfs) > 0 0 0 /usr 0 0 0 /usr > 0 0 0 /var 0 0 0 /var > 0 0 0 /home 0 0 0 /home >Add a user defined partition Add a user defined partition >Change input units (sectors/cylinders/MB) Change input units (sectors/cylinders/MB) >Accept partition sizes. Free space 138555 MB, 12 free partitions. We now have your BSD-disklabel partitions as: This is your last chance to change them.        Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 236921 236922 FFSv2 Yes Yes / b: 236922 286069 49148 swap c:0 286069 286070 NetBSD partition d:0 286069 286070 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk[3 7m          [LOGICAL VOLUME ]:                          Ok, we are now ready to install NetBSD on your hard disk (sd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yesb (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes Setting up the DOS partition table ...                            Status: RunningCommand: disklabel -w -r -f /tmp/disktab sd0 'LOGICAL VOLUME ' --------------------------------------------------------------------------------  Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 32768 -f 4096 /dev/rsd0a -------------------------------------------------------------------------------- cprng sysctl: WARNING pseudorandom rekeying. /dev/rsd0a: 236922.1MB (485216544 sectors) block size 32768, fragment size 4096using 320 cylinder groups of 740.41MB, 23693 blks, 46720 inodes. .......ciss0: normal state on 'ciss0:0' (online) ........................................................................ Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baud(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B a: Use BIOS console(0x(B(0x(B>b: Use serial port com0bx [C(0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B b: Use serial port com0>x: Exit Installing boot blocks on sd0....                             Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 13, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install imac ge media(0x(B(0x(B b: FTP(0x(B(0x(B c: HTTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: CD-ROM / DVD / install image media>c: HTTP I have found the following network interfaces: bnx0 bnx1 bnx2 bnx3bnx0 [m  Which device shall I use? [bnx0]: bnx0 To be able to use the network, we need answers to the following: Network media type [37m[autoselect]: (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Perform DHCP autoconfiguration? (0x(B(0x(B(0x(B(0x(B>a: Yes(0x(B(0x(B b: No(0x(b B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Yes>b: NoYour DNS domainetbsd.org 2H(0 (B(0 (B (0 (B(0 (B(0 (B(0 (B (0 (B(0 (B (0 (B(0 (B: netbsd.org Your host nameanita-test : anita-test Your IPv4 number[310.169.0.2 7m: 10.169.0.2 IPv4 Netmask[37255.255.255.0 m[0xff000000]: 255.255.255.0 IPv4 gateway[410.169.0.1 4m: 10.169.0.1 IPv4 name server[310.0.1.1 7m: 10.0.1.1(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Perform IPv6 autoconfiguration? (0x(B(0x(B(0x(B(0x(B>a: No H(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bhe following are the values you entered. DNS Domain: netbsd.org Host Name: anita-test Primary Interface: bnx0 Host IP: 10.169.0.2 Netmask: 255.255.255.0Nameserver: 10.0.1.1Gateway: 10.169.0.1 Media type: autoselectIPv6 autoconf:no IPv6 Nameserver: (0lqqqqqqqqqqqqqqqqqk(B(0x(B Are they OK? (0x(B(0x(B(0x(B(0x(B>a: Yes ;49H(0x(B(0x(B b: No(0x(B(0mqqqqqqqqqqqqqqqqqj(B                        Status: RunningCommand: /sbin/route -n flush -inet -------------------------------------------------------------------------------- Finished                                                Status: RunningCommand: /sbin/route -n add default 10.169.0.1 -------------------------------------------------------------------------------- add net default: gateway 10.169.0.1 Finished                        Waiting while network interface comes up.                         Status: RunningCommand: /sbin/ping -v -c 5 -w 5 -o -n 10.0.1.1 -------------------------------------------------------------------------------- PING 10.0.1.1 (10.0.1.1): 48 data bytes 64 bytes from 10.0.1.1: icmp_seq=0 ttl=254 time=0.661 ms  ----10.0.1.1 PING Statistics---- 1 packets transmitted, 1 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 0.661/0.661/0.661/0.000 ms Finished                                                Status: RunningCommand: /sbin/ping -v -c 5 -w 5 -o -n 10.169.0.1 -------------------------------------------------------------------------------- PING 10.169.0.1 (10.169.0.1): 48 data bytes 64 bytes from 10.169.0.1: icmp_seq=0 ttl=255 time=0.077 ms  ----10.169.0.1 PING Statistics---- 1 packets transmitted, 1 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 0.077/0.077/0.077/0.000 ms Finished                         The following are the http site, directory, user, anda 10.169.0.1 b  password that will be used. If "user" is "ftp", then the password is not needed. >a: Host ftp.NetBSD.org b: Base directorypub/NetBSD/NetBSD-6.1.5 c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No x: Get Distribution m(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Host: ftp.NetBSD.org 10.169.0.1          a: Host 10.169.0.1 b: Base directorypub/NetBSD/NetBSD-6.1.5 c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No x: Get Distribution a: Host 10.169.0.1 >b: Base directory pub/NetBSD/NetBSD-6.1.5(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Base directory: pub/NetBSD/NetBSD-6.1.5  >         a: Host10.169.0.1 >b: Base directory c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No x: Get Distribution b: Base directory>x: Get Distribution                        Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/kern-GENERIC.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/kern-GENERIC.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5842 KiB 46.98 M00:00 5983056 bytes retrieved in 00:00 (46.92 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14600 KiB 131.04 M00:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/modules.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/modules.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 2126 KiB 46.83 M00:00 2177633 bytes retrieved in 00:00 (46.66 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 7450 KiB 93.93 M00:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/base.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/base.tgz 0% || 00.00 KiB/s --:-- ETA60% |*********************28000 KiB 27.15 M00:00 ETA10**************| 4628332.62 47394732 bytes retrieved in 00:01 (32.62 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA50% |*****************67584 KiB 65.73 M00:00 ETA99***************** | 129 MiB 64.45100*| 13059.89 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/etc.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/etc.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 403 KiB 47.03 M00:00 412876 bytes retrieved in 00:00 (46.39 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 1740 KiB 30.37 M00:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/comp.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/comp.tgz 0% || 00.00 KiB/s --:-- ETA31% |**********27648 KiB 26.15 M00:02 ETA40****3558416.891***************** | 7961625.760 ETA100****| 868536 88938481 bytes retrieved in 00:03 (26.76 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA31% |**********98368 KiB 95.72 M00:02 ETA50******* 152 MiB 75.561 ETA72********2192.891******7869.20 ETA7**9358.54100**| 3021.21 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/man.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/man.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 10029 KiB 46.92 M00:00 10270422 bytes retrieved in 00:00 (46.89 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/man.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 47970 KiB 65.52 M00:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/tests.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/tests.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14963 KiB 47.26 M00:00 15322638 bytes retrieved in 00:00 (47.24 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 40790 KiB 67.15 M00:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/text.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/text.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 3532 KiB 3.46 M00:00 3616916 bytes retrieved in 00:00 (3.46 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/text.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 15450 KiB 105.44 M00:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xbase.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xbase.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 8273 KiB 47.45 M00:00 8471817 bytes retrieved in 00:00 (47.41 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xbase.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA95% |********************************* | 25344 KiB 24.66 M00:00 ETA100**| 265005.30 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xcomp.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xcomp.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 18614 KiB 47.23 M00:00 19061610 bytes retrieved in 00:00 (47.21 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xcomp.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA83% |*****************************61440 KiB 59.79 M00:00 ETA100******| 73617.28 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xetc.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xetc.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 210144.52 M00:00 21010 bytes retrieved in 00:00 (31.35 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xetc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 130 KiB 465.4400:00 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xfont.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xfont.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 32014 KiB 47.31 M00:00 32782910 bytes retrieved in 00:00 (47.30 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xfont.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA99% |********************************** | 74944 KiB 72.94 M00:00 ETA100*| 754703.02 Finished                                                Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xserver.tgz -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xserver.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9482 KiB 47.03 M00:00 9709820 bytes retrieved in 00:00 (46.99 MiB/s) Finished                                                Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xserver.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 26900 KiB 128.44 M00:00 Finished                         All selected distribution sets unpacked successfully. Making device nodes ... (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B Is the network information you entered accurate for this machine (0x(B (0x(B in regular operation and do you want it installed in /etc?(0x(B (0x(B(0x(B (0x(B>a: Yes(0x(Ba (0x(B b: No(0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B M  The extraction of the selected sets for NetBSD-6.1.5 is complete. The system is now able to boot from the selected harddisk. To complete the installation, sysinst will give you the opportunity to configure some essential things first     (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue( 0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B  The extraction of the selected sets for NetBSD-6.1.5 is complete. The system  is now able to boot from the selected harddisk. To complete the  installation, sysinst will give you the opportunity to configure some  essential things first.       (0lqqqqqqqqqqqqqqqqqqqqqqqk(B  (0x(B>Hit enter to continue (0x(B  (0mqqqqqqqqqqqqqqqqqqqqqqqj(B                                      Configure the additional items as needed. a: Configure networkconfigure b: TimezoneUTC c: Root shell/bin/sh d: Change root password***EMPTY*** e: Enable installation of binary packagesconfigure f: Fetch and unpack pkgsrc for building from source install g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO >x: Finished configuringx [27m The installation of NetBSD-6.1.5 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. The afterboot(8) manpage is another recommended reading; it contains a list of things to be checked after the first complete boot.  At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.      (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqj(B NetBSD/amd64 6.1.5  This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work.  Activate the current selection from the menu by typing the enter key.  Thank you for using NetBSD!                         Status: RunningCommand: /sbin/umount /targetroot/ -------------------------------------------------------------------------------- Finished                        (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-6.1.5 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install Systemx (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System x [?25h# halt x x: not found # halt halt halted by root This is anita version 1.40 sudo noemu \ --workdir \ ./xen-baremetal-work \ --releasedir \ ./xen-baremetal-work/download \ --arch \ amd64 \ --boot-from \ disk \ --conf \ ../noemu.conf noemu arguments: ['/usr/local/bin/noemu', '--workdir', './xen-baremetal-work', '--releasedir', './xen-baremetal-work/download', '--arch', 'amd64', '--boot-from', 'disk', '--conf', '../noemu.conf'] boot_from: disk workdir: ./xen-baremetal-work tftpdir: /home/gson/anita/xen-tests/xen-baremetal-work service ['/usr/sbin/inetd', '-d', './xen-baremetal-work/inetd.conf'] pid 16524 ilo3_power True power on status=0 status_tag=COMMAND COMPLETED Sat Apr 1 05:05:16 2017 Server powering on ....... connected >> NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.1.5) >> Memory: 637/3668992 k 1. Boot normally 2. Boot single user 3. Disable ACPI 4. Disable ACPI and SMP 5. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-\|/-\11734568|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+632152/-\|/-\|/-\|/-\|/-\|+647944/- [839760\|/-\|/-\|/-\|/-\|/-\|/-\|/+555771-\|/-\|/-\|/-\|/-]=0xebee00 \|/-\|/-\|/-\|/-\|/-\|/-\|/-WARNING: couldn't open /var/db/entropy-file WARNING: 1 module failed to load Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1.5 (GENERIC) total memory = 49141 MB avail memory = 47701 MB mainbus0 (root) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110623/tbfadt-638) ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110623/tbfadt-638) cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu1 at mainbus0 apid 32: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu2 at mainbus0 apid 16: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu3 at mainbus0 apid 48: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu4 at mainbus0 apid 4: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu5 at mainbus0 apid 36: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu6 at mainbus0 apid 20: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu7 at mainbus0 apid 52: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu8 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu9 at mainbus0 apid 34: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu10 at mainbus0 apid 18: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu11 at mainbus0 apid 50: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu12 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu13 at mainbus0 apid 33: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu14 at mainbus0 apid 17: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu15 at mainbus0 apid 49: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu16 at mainbus0 apid 5: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu17 at mainbus0 apid 37: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu18 at mainbus0 apid 21: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu19 at mainbus0 apid 53: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu20 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu21 at mainbus0 apid 35: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu22 at mainbus0 apid 19: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu23 at mainbus0 apid 51: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 ioapic0 at mainbus0 apid 8 ioapic1 at mainbus0 apid 0 acpi0 at mainbus0: Intel ACPICA 20110623 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) MOMB (PNP0C02) at acpi0 not configured MI0 (IPI0001) at acpi0 not configured attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (BEEP, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 COMA (PNP0501) at acpi0 not configured PMI0 (ACPI000D) at acpi0 not configured acpitz0 at acpi0 (THM0): cpu0 attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13) ppb0: PCI Express 2.0 pci1 at ppb0 bus 5 ciss0 at pci1 dev 0 function 0: HP Smart Array 11 ciss0: interrupting at ioapic1 pin 4 ciss0: 1 LD, HW rev 2, FW 5.14/5.14 scsibus0 at ciss0: 1 target, 1 lun per target ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13) ppb1: PCI Express 2.0 pci2 at ppb1 bus 12 ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13) ppb2: PCI Express 2.0 pci3 at ppb2 bus 9 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13) ppb3: PCI Express 2.0 pci4 at ppb3 bus 13 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13) ppb4: PCI Express 2.0 pci5 at ppb4 bus 14 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13) ppb5: PCI Express 2.0 pci6 at ppb5 bus 15 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13) ppb6: PCI Express 2.0 pci7 at ppb6 bus 3 bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx0: Ethernet address e4:11:5b:d3:13:fc bnx0: interrupting at ioapic1 pin 6 brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx1: Ethernet address e4:11:5b:d3:13:fe bnx1: interrupting at ioapic1 pin 13 brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13) ppb7: PCI Express 2.0 pci8 at ppb7 bus 4 bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx2: Ethernet address e4:11:5b:d3:13:a4 bnx2: interrupting at ioapic1 pin 7 brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx3: Ethernet address e4:11:5b:d3:13:a6 bnx3: interrupting at ioapic1 pin 15 brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13) ppb8: PCI Express 2.0 pci9 at ppb8 bus 6 ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13) ppb9: PCI Express 2.0 pci10 at ppb9 bus 16 pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13) pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13) pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13) pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13) pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13) pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13) pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13) pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13) pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13) pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13) pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13) pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13) vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at pci0 dev 20 function 1 not configured vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00) ppb10: PCI Express 1.0 pci11 at ppb10 bus 17 ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00) ppb11: PCI Express 1.0 pci12 at ppb11 bus 2 vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01) uhci0: interrupting at ioapic0 pin 17 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00) uhci1: interrupting at ioapic0 pin 20 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00) uhci2: interrupting at ioapic0 pin 23 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00) uhci3: interrupting at ioapic0 pin 22 usb3 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00) uhci4: interrupting at ioapic0 pin 23 usb4 at uhci4: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00) ehci0: interrupting at ioapic0 pin 20 ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4 usb5 at ehci0: USB revision 2.0 ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90) pci13 at ppb12 bus 1 vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 pckbd_enable: command error radeondrm0 at vga0: ATI ES1000 RN50 radeondrm0: Initialized radeon 1.29.0 20080613 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00) ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo acpicpu0 at cpu0: ACPI CPU coretemp0 at cpu0: thermal sensor, 1 C resolution acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution acpicpu4 at cpu4: ACPI CPU coretemp4 at cpu4: thermal sensor, 1 C resolution acpicpu5 at cpu5: ACPI CPU coretemp5 at cpu5: thermal sensor, 1 C resolution acpicpu6 at cpu6: ACPI CPU coretemp6 at cpu6: thermal sensor, 1 C resolution acpicpu7 at cpu7: ACPI CPU coretemp7 at cpu7: thermal sensor, 1 C resolution acpicpu8 at cpu8: ACPI CPU coretemp8 at cpu8: thermal sensor, 1 C resolution acpicpu9 at cpu9: ACPI CPU coretemp9 at cpu9: thermal sensor, 1 C resolution acpicpu10 at cpu10: ACPI CPU coretemp10 at cpu10: thermal sensor, 1 C resolution acpicpu11 at cpu11: ACPI CPU coretemp11 at cpu11: thermal sensor, 1 C resolution acpicpu12 at cpu12: ACPI CPU acpicpu13 at cpu13: ACPI CPU acpicpu14 at cpu14: ACPI CPU acpicpu15 at cpu15: ACPI CPU acpicpu16 at cpu16: ACPI CPU acpicpu17 at cpu17: ACPI CPU acpicpu18 at cpu18: ACPI CPU acpicpu19 at cpu19: ACPI CPU acpicpu20 at cpu20: ACPI CPU acpicpu21 at cpu21: ACPI CPU acpicpu22 at cpu22: ACPI CPU acpicpu23 at cpu23: ACPI CPU scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors sd0: async, 8-bit transfers, tagged queueing uhidev0 at uhub3 port 1 configuration 1 interface 0 uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 uhidev1 at uhub3 port 1 configuration 1 interface 1 uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs ugen0 at uhub4 port 2 ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2 Sat Apr 1 04:09:23 UTC 2017 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: anita-test.netbsd.org IPv6 mode: host Configuring network interfaces: bnx0. Adding interface aliases:. add net default: gateway 10.169.0.1 Building databases: devcprng sysctl: WARNING pseudorandom rekeying. , utmp, utmpx, services. Starting syslogd. Mounting all filesystems... Clearing temporary files. Updating fontconfig cache: done. Checking quotas: done. swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db) Starting inetd. Starting cron. Sat Apr 1 04:09:37 UTC 2017 NetBSD/amd64 (anita-test.netbsd.org) (console) login: NetBSD/amd64 (anita-test.netbsd.org) (console) login: root root Apr 1 04:09:39 anita-test login: ROOT LOGIN (root) on tty console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1.5 (GENERIC) Welcome to NetBSD!  H H H H H H H H HTerminal type is vt100. We recommend that you create a non-root account and use su(1) for root access. anita-test# exec /bin/sh exec /bin/sh anita-test# PS1='anita-root-shell-pr''ompt-1491019538.73# ' PS1='anita-root-shell-pr''ompt-1491019538.73# ' anita-root-shell-prompt-1491019538.73# set -x && ( echo get img | tftp 10.169.0.1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && sh /mnt/install-xen.sh set -x && ( echo get img | tftp 10.169.0. 1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && sh /mnt/install-xen.sh + + tftp '10.169.0.1' echo get img tftp> Received 1048771 bytes in 0.2 seconds tftp> + vnconfig vnd0 img + mount /dev/vnd0a /mnt + sh '/mnt/install-xen.sh' + echo 'this is install-xen.sh' this is install-xen.sh + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS 0 0 - bnx0 10.169.0/24 link#1 UC 1 0 - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc 1 2050 - bnx0 127/8 127.0.0.1 UGRS 0 0 33648 lo0 127.0.0.1 127.0.0.1 UH 1 0 33648 lo0 + sleep 30 + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS 0 0 - bnx0 10.169.0/24 link#1 UC 1 0 - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc 1 2050 - bnx0 127/8 127.0.0.1 UGRS 0 0 33648 lo0 127.0.0.1 127.0.0.1 UH 1 0 33648 lo0 + ed '/etc/ssh/sshd_config' 3691 #PermitRootLogin no #X11Forwarding no 3691 + echo sshd=YES + '/etc/rc.d/sshd' start Generating public/private rsa1 key pair. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: 33:70:80:ca:80:cf:6b:a1:d5:19:f8:9b:3f:a3:89:de root@anita-test.netbsd.org The key's randomart image is: +--[RSA1 1024]----+ |. . .. | |o . o . | | = + o. . | | B + o | | o o o S | |. o o o | | . . | | o .+ | | .o E. o | +-----------------+ Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: 85:1f:69:5d:62:8d:16:e5:c8:76:ed:21:5b:ab:86:82 root@anita-test.netbsd.org The key's randomart image is: +--[ DSA 1024]----+ | +=o | | . =o=.. | | . =.=.oo.| | + o .+.o| | S . . ..| | . . . | | E . . o | | . . | | | +-----------------+ Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: 27:a8:70:3c:88:3c:26:5e:86:b3:2b:61:9b:89:4a:27 root@anita-test.netbsd.org The key's randomart image is: +--[ECDSA 521]---+ | | | | | | |...o . | |o*oo+ . S . | |=.*o o o | |oE+.. | |+++ | |+. | +-----------------+ Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 64:68:62:a5:e0:f7:1a:c5:be:74:29:f6:9b:9b:7b:a6 root@anita-test.netbsd.org The key's randomart image is: +--[ RSA 1024]----+ | . . | | . . + . | | . = = o | | o * o . | | . * S | | = = | | . . . | | +o | | E* | +-----------------+ Starting sshd. + echo 'tmpfs /tmp tmpfs rw' + mount /tmp + echo + 'comps=kernel tools' + export 'PKG_PATH=ftp://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/6.0/All' + pkg=xenkernel45 + 'pkg_add' xenkernel45 pkg_add: Warning: package `xenkernel45-4.5.5nb3' was built for a platform: pkg_add: NetBSD/x86_64 6.0 (pkg) vs. NetBSD/x86_64 6.1.5 (this host) =========================================================================== $NetBSD: MESSAGE,v 1.1 2015/01/20 16:42:13 bouyer Exp $ The Xen hypervisor is installed under the following locations: /usr/pkg/xen45-kernel/xen.gz (standard hypervisor) /usr/pkg/xen45-kernel/xen-debug.gz (debug hypervisor) =========================================================================== + r=true + eval 'xenkernel_binary_pkg_ok=true' + 'xenkernel_binary_pkg_ok=true' + eval echo 'xenkernel_binary_pkg_ok=true' + echo 'xenkernel_binary_pkg_ok=true' xenkernel_binary_pkg_ok=true + 'pkg_delete' -R xenkernel45 + pkg=xentools45 + 'pkg_add' xentools45 pkg_add: Can't process ftp://ftp.netbsd.org:21/pub/pkgsrc/packages/NetBSD/amd64/6.0/All/xentools45*: File unavailable (e.g., file busy) pkg_add: no pkg found for 'xentools45', sorry. pkg_add: 1 package addition failed + r=false + eval 'xentools_binary_pkg_ok=false' + 'xentools_binary_pkg_ok=false' + eval echo 'xentools_binary_pkg_ok=false' + echo 'xentools_binary_pkg_ok=false' xentools_binary_pkg_ok=false + 'pkg_delete' -R xentools45 pkg_delete: No matching package for basename `xentools45' of `xentools45' + true + sysctl -n 'hw.ncpu' + echo 'MAKE_JOBS=24' + echo WRKOBJDIR=/tmp + unset 'PKG_PATH' + cd /usr + time ftp 'http://mirror.araneus.fi/ftp.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz' Requesting http://mirror.araneus.fi/ftp.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz 0% | | 0 0.00 KiB/s --:-- ETA 83% |***************************** | 48224 KiB 46.83 MiB/s 00:00 ETA100% |***********************************| 57980 KiB 46.90 MiB/s 00:00 ETA 59371743 bytes retrieved in 00:01 (46.90 MiB/s) 1.23 real 0.01 user 0.42 sys + time tar xfz 'pkgsrc.tar.gz' 154.69 real 2.75 user 17.08 sys + cd /usr/pkgsrc/sysutils + pkg=xenkernel45 + cd xenkernel45 + make install + r=true + echo 'alles gut' alles gut + eval 'xenkernel_source_pkg_ok=true' + 'xenkernel_source_pkg_ok=true' + eval echo 'xenkernel_source_pkg_ok=true' + echo 'xenkernel_source_pkg_ok=true' xenkernel_source_pkg_ok=true + cd '..' + pkg=xentools45 + cd xentools45 + make install + r=true + echo 'alles gut' alles gut + eval 'xentools_source_pkg_ok=true' + 'xentools_source_pkg_ok=true' + eval echo 'xentools_source_pkg_ok=true' + echo 'xentools_source_pkg_ok=true' xentools_source_pkg_ok=true + cd '..' + cp '/usr/pkg/xen45-kernel/xen.gz' '/usr/pkg/xen45-kernel/xen-debug.gz' / + cp '/usr/pkg/share/examples/rc.d/xendomains' '/etc/rc.d/' + cp '/usr/pkg/share/examples/rc.d/xencommons' '/etc/rc.d/' + cd /dev + sh MAKEDEV xen + cd / + ftp 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/kernel/netbsd-XEN3_DOM0.gz' Requesting http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/binary/kernel/netbsd-XEN3_DOM0.gz 0% | | 0 0.00 KiB/s --:-- ETA100% |***********************************| 5016 KiB 26.90 MiB/s 00:00 ETA 5136701 bytes retrieved in 00:00 (26.88 MiB/s) + ed '/boot.cfg' 319 menu=Boot normally:rndseed /var/db/entropy-file;boot netbsd 433 + cat + echo 'Xen installation successful' Xen installation successful anita-root-shell-prompt-1491019538.73# echo exit_status=$?= echo exit_status=$?= + echo 'exit_status=0=' exit_status=0= anita-root-shell-prompt-1491019538.73# halt halt + halt Apr 1 04:36:04 anita-test halt: halted by root Apr 1 04:36:05 anita-test syslogd[165]: Exiting on signal 15 syncing disks... done brgphy3: detached brgphy2: detached brgphy1: detached brgphy0: detached com1: detached bnx3: detached bnx2: detached bnx1: detached bnx0: detached pci11: detached pci10: detached pci9: detached pci8: detached pci7: detached pci6: detached pci5: detached pci4: detached pci3: detached pci2: detached sysbeep0: detached midi0: detached ppb10: detached pchb12: detached pchb11: detached pchb10: detached pchb9: detached pchb8: detached pchb7: detached pchb6: detached pchb5: detached pchb4: detached pchb3: detached pchb2: detached pchb1: detached ppb9: detached ppb8: detached ppb7: detached ppb6: detached ppb5: detached ppb4: detached ppb3: detached ppb2: detached ppb1: detached pchb0: detached audio0: detached vnd0: detached The operating system has halted. PleaThis is anita version 1.40 sudo noemu \ --workdir \ ./xen-baremetal-work \ --releasedir \ ./xen-baremetal-work/download \ --arch \ amd64 \ --boot-from \ disk \ --conf \ ../noemu.conf noemu arguments: ['/usr/local/bin/noemu', '--workdir', './xen-baremetal-work', '--releasedir', './xen-baremetal-work/download', '--arch', 'amd64', '--boot-from', 'disk', '--conf', '../noemu.conf'] boot_from: disk workdir: ./xen-baremetal-work tftpdir: /home/gson/anita/xen-tests/xen-baremetal-work service ['/usr/sbin/inetd', '-d', './xen-baremetal-work/inetd.conf'] pid 29391 ilo3_power True power on status=0 status_tag=COMMAND COMPLETED Sat Apr 1 05:36:53 2017 Server powering on ....... connected >> NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.1.5) >> Memory: 637/3668992 k 1. Xen 2. Boot normally 3. Boot single user 4. Disable ACPI 5. Disable ACPI and SMP 6. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-\|/-\1954848|/-\|/-\|/-\|/-\|/-\|/-\|/-\+314336|/-\|/-\|/-\|/-\|/-\|/-\|/-\=0x22a0c0 |/-\|/-\|/-\|/-\Loading /netbsd-XEN3_DOM0.gz |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Xen 4.5.5 (XEN) Xen version 4.5.5 (root@) (gcc (NetBSD nb2 20110806) 4.5.3) debug=y Sat Apr 1 04:19:05 UTC 2017 (XEN) Latest ChangeSet: (XEN) Bootloader: unknown (XEN) Command line: dom0_mem=256M console=com1 com1=9600,8n1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f400 (usable) (XEN) 000000000009f400 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000df62f000 (usable) (XEN) 00000000df62f000 - 00000000df63c000 (ACPI data) (XEN) 00000000df63c000 - 00000000df63d000 (usable) (XEN) 00000000df63d000 - 00000000e4000000 (reserved) (XEN) 00000000fec00000 - 00000000fee10000 (reserved) (XEN) 00000000ff800000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000c1ffff000 (usable) (XEN) ACPI: RSDP 000F4F00, 0024 (r2 HP ) (XEN) ACPI: XSDT DF630140, 00B4 (r1 HP ProLiant 2 Ò 162E) (XEN) ACPI: FACP DF630240, 00F4 (r3 HP ProLiant 2 Ò 162E) (XEN) ACPI: DSDT DF630340, 20BD (r1 HP DSDT 1 INTL 20030228) (XEN) ACPI: FACS DF62F100, 0040 (XEN) ACPI: SPCR DF62F140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) (XEN) ACPI: MCFG DF62F1C0, 003C (r1 HP ProLiant 1 0) (XEN) ACPI: HPET DF62F200, 0038 (r1 HP ProLiant 2 Ò 162E) (XEN) ACPI: FFFF DF62F240, 0064 (r2 HP ProLiant 2 Ò 162E) (XEN) ACPI: SPMI DF62F2C0, 0040 (r5 HP ProLiant 1 Ò 162E) (XEN) ACPI: ERST DF62F300, 01D0 (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: APIC DF62F500, 015E (r1 HP ProLiant 2 0) (XEN) ACPI: SRAT DF62F680, 0570 (r1 HP Proliant 1 Ò 162E) (XEN) ACPI: FFFF DF62FC00, 0176 (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: BERT DF62FD80, 0030 (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: HEST DF62FDC0, 00BC (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: DMAR DF62FE80, 013C (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: SSDT DF632400, 0125 (r3 HP CRSPCI0 2 HP 1) (XEN) ACPI: SSDT DF632540, 01CF (r3 HP riser1a 2 INTL 20061109) (XEN) ACPI: SSDT DF632740, 03BB (r1 HP pcc 1 INTL 20090625) (XEN) ACPI: SSDT DF632B00, 0377 (r1 HP pmab 1 INTL 20090625) (XEN) ACPI: SSDT DF632E80, 4104 (r1 INTEL PPM RCM 1 INTL 20061109) (XEN) System RAM: 49141MB (50321208kB) (XEN) SRAT: PXM 0 -> APIC 00 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 01 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 02 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 03 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 04 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 05 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 10 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 11 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 12 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 13 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 14 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 15 -> Node 0 (XEN) SRAT: PXM 1 -> APIC 20 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 21 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 22 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 23 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 24 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 25 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 30 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 31 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 32 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 33 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 34 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 35 -> Node 1 (XEN) SRAT: Node 0 PXM 0 0-e0000000 (XEN) SRAT: Node 0 PXM 0 100000000-620000000 (XEN) SRAT: Node 1 PXM 1 620000000-c20000000 (XEN) NUMA: Allocated memnodemap from c1fff9000 - c1fffa000 (XEN) NUMA: Using 17 for the hash shift. (XEN) Domain heap initialised DMA width 32 bits (XEN) found SMP MP-table at 000f4f80 (XEN) DMI 2.7 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x908 (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:904,1:0], pm1x_evt[1:900,1:0] (XEN) ACPI: wakeup_vec[df62f10c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled) (XEN) Processor #32 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) (XEN) Processor #16 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled) (XEN) Processor #48 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled) (XEN) Processor #36 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) (XEN) Processor #20 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled) (XEN) Processor #52 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled) (XEN) Processor #34 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) (XEN) Processor #18 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled) (XEN) Processor #50 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled) (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled) (XEN) Processor #33 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) (XEN) Processor #17 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled) (XEN) Processor #49 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) (XEN) Processor #37 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled) (XEN) Processor #21 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled) (XEN) Processor #53 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled) (XEN) Processor #35 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) (XEN) Processor #19 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled) (XEN) Processor #51 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) Overriding APIC driver with bigsmp (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) Failed to get Error Log Address Range. (XEN) HEST: Table parsing has been initialized (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 32 CPUs (8 hotplug CPUs) (XEN) IRQ limits: 48 GSI, 4576 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3066.843 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:719: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) alt table ffff82d0802dadd0 -> ffff82d0802dbf58 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 3f (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-3f (XEN) [VT-D]Disabling IOMMU due to Intel 5500/5520/X58 Chipset errata #47, #53 (XEN) I/O virtualisation disabled (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Defaulting to alternative key handling; send 'A' to switch to normal mode. (XEN) Allocated console ring of 256 KiB. (XEN) mwait-idle: MWAIT substates: 0x1120 (XEN) mwait-idle: v0.4 model 0x2c (XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) Brought up 24 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) Dom0 has maximum 1008 PIRQs (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80000000 memsz=0xdbf5c0 (XEN) elf_parse_binary: memory: 0xffffffff80000000 -> 0xffffffff80dbf5c0 (XEN) elf_xen_parse: __xen_guest: "GUEST_OS=NetBSD,GUEST_VER=4.99,XEN_VER=xen-3.0,LOADER=generic,VIRT_BASE=0xffffffff80000000,ELF_PADDR_OFFSET=0xffffffff80000000,VIRT_ENTRY=0xffffffff80100000,HYPERCALL_PAGE=0x00000101,BSD_SYMTAB=yes" (XEN) elf_xen_parse_guest_info: GUEST_OS="NetBSD" (XEN) elf_xen_parse_guest_info: GUEST_VER="4.99" (XEN) elf_xen_parse_guest_info: XEN_VER="xen-3.0" (XEN) elf_xen_parse_guest_info: LOADER="generic" (XEN) elf_xen_parse_guest_info: VIRT_BASE="0xffffffff80000000" (XEN) elf_xen_parse_guest_info: ELF_PADDR_OFFSET="0xffffffff80000000" (XEN) elf_xen_parse_guest_info: VIRT_ENTRY="0xffffffff80100000" (XEN) elf_xen_parse_guest_info: HYPERCALL_PAGE="0x00000101" (XEN) elf_xen_parse_guest_info: BSD_SYMTAB="yes" (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80000000 (XEN) virt_kend = 0xffffffff80eddef0 (XEN) virt_entry = 0xffffffff80100000 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80000000 -> 0xffffffff80dbf5c0 (XEN) Dom0 symbol map 0xffffffff80dbf5c0 -> 0xffffffff80eddef0 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000c01000000->0000000c02000000 (61440 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80000000->ffffffff80eddef0 (XEN) Init. ramdisk: ffffffff80ede000->ffffffff80ede000 (XEN) Phys-Mach map: ffffffff80ede000->ffffffff80f5e000 (XEN) Start info: ffffffff80f5e000->ffffffff80f5e4b4 (XEN) Page tables: ffffffff80f5f000->ffffffff80f6a000 (XEN) Boot stack: ffffffff80f6a000->ffffffff80f6b000 (XEN) TOTAL: ffffffff80000000->ffffffff81000000 (XEN) ENTRY ADDRESS: ffffffff80100000 (XEN) Dom0 has maximum 24 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80000000 -> 0xffffffff80c07c58 (XEN) elf_load_bsdsyms: shdr 32 at 0xffff830c1fce0d58 -> 0xffffffff80dbfec8 (XEN) elf_load_bsdsyms: shdr 33 at 0xffff830c1fce1808 -> 0xffffffff80dc00b8 (XEN) elf_load_bsdsyms: shdr 34 at 0xffff830c1fd8df60 -> 0xffffffff80e6c810 (XEN) Scrubbing Free RAM on 2 nodes using 12 CPUs (XEN) .................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 288kB init memory. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1.5 (XEN3_DOM0) total memory = 256 MB avail memory = 233 MB mainbus0 (root) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110623/tbfadt-638) ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110623/tbfadt-638) cpu0 at mainbus0 apid 0 cpu1 at mainbus0 apid 32 cpu2 at mainbus0 apid 16 cpu3 at mainbus0 apid 48 cpu4 at mainbus0 apid 4 cpu5 at mainbus0 apid 36 cpu6 at mainbus0 apid 20 cpu7 at mainbus0 apid 52 cpu8 at mainbus0 apid 2 cpu9 at mainbus0 apid 34 cpu10 at mainbus0 apid 18 cpu11 at mainbus0 apid 50 cpu12 at mainbus0 apid 1 cpu13 at mainbus0 apid 33 cpu14 at mainbus0 apid 17 cpu15 at mainbus0 apid 49 cpu16 at mainbus0 apid 5 cpu17 at mainbus0 apid 37 cpu18 at mainbus0 apid 21 cpu19 at mainbus0 apid 53 cpu20 at mainbus0 apid 3 cpu21 at mainbus0 apid 35 cpu22 at mainbus0 apid 19 cpu23 at mainbus0 apid 51 ioapic0 at mainbus0 apid 8 (XEN) io_apic.c:2392: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000100f0 (XEN) ioapic_guest_write: old_entry=00010000 pirq=-1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2392: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000100f0 (XEN) ioapic_guest_write: old_entry=000000f0 pirq=-1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2392: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000100f1 (XEN) ioapic_guest_write: old_entry=000000f1 pirq=-1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) allocated vector 98 for irq 16 (XEN) allocated vector a0 for irq 17 (XEN) allocated vector a8 for irq 18 (XEN) allocated vector b0 for irq 19 (XEN) allocated vector b8 for irq 20 (XEN) allocated vector c0 for irq 21 (XEN) allocated vector c8 for irq 22 (XEN) allocated vector d0 for irq 23 ioapic1 at mainbus0 apid 0 (XEN) allocated vector d8 for irq 24 (XEN) allocated vector 21 for irq 25 (XEN) allocated vector 29 for irq 26 (XEN) allocated vector 31 for irq 27 (XEN) allocated vector 39 for irq 28 (XEN) allocated vector 41 for irq 29 (XEN) allocated vector 49 for irq 30 (XEN) allocated vector 51 for irq 31 (XEN) allocated vector 59 for irq 32 (XEN) allocated vector 61 for irq 33 (XEN) allocated vector 69 for irq 34 (XEN) allocated vector 71 for irq 35 (XEN) allocated vector 79 for irq 36 (XEN) allocated vector 81 for irq 37 (XEN) allocated vector 89 for irq 38 (XEN) allocated vector 91 for irq 39 (XEN) allocated vector 99 for irq 40 (XEN) allocated vector a1 for irq 41 (XEN) allocated vector a9 for irq 42 (XEN) allocated vector b1 for irq 43 (XEN) allocated vector b9 for irq 44 (XEN) allocated vector c1 for irq 45 (XEN) allocated vector c9 for irq 46 (XEN) allocated vector d1 for irq 47 ipmi0 at mainbus0 hypervisor0 at mainbus0: Xen version 4.5.5 vcpu0 at hypervisor0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver acpi0 at hypervisor0: Intel ACPICA 20110623 MOMB (PNP0C02) at acpi0 not configured MI0 (IPI0001) at acpi0 not configured TIME (PNP0100) at acpi0 not configured HPET (PNP0103) at acpi0 not configured pcppi0 at acpi0 (BEEP, PNP0800): io 0x61 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 COMA (PNP0501) at acpi0 not configured PMI0 (ACPI000D) at acpi0 not configured acpitz0 at acpi0 (THM0): vcpu0 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at hypervisor0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13) ppb0: PCI Express 2.0 pci1 at ppb0 bus 5 ciss0 at pci1 dev 0 function 0: HP Smart Array 11 ciss0: interrupting at ioapic1 pin 4, event channel 6 ciss0: 1 LD, HW rev 2, FW 5.14/5.14 scsibus0 at ciss0: 1 target, 1 lun per target ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13) ppb1: PCI Express 2.0 pci2 at ppb1 bus 12 ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13) ppb2: PCI Express 2.0 pci3 at ppb2 bus 9 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13) ppb3: PCI Express 2.0 pci4 at ppb3 bus 13 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13) ppb4: PCI Express 2.0 pci5 at ppb4 bus 14 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13) ppb5: PCI Express 2.0 pci6 at ppb5 bus 15 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13) ppb6: PCI Express 2.0 pci7 at ppb6 bus 3 bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx0: Ethernet address e4:11:5b:d3:13:fc bnx0: interrupting at ioapic1 pin 6, event channel 7 brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx1: Ethernet address e4:11:5b:d3:13:fe bnx1: interrupting at ioapic1 pin 13, event channel 8 brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13) ppb7: PCI Express 2.0 pci8 at ppb7 bus 4 bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx2: Ethernet address e4:11:5b:d3:13:a4 bnx2: interrupting at ioapic1 pin 7, event channel 9 brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx3: Ethernet address e4:11:5b:d3:13:a6 bnx3: interrupting at ioapic1 pin 15, event channel 10 brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13) ppb8: PCI Express 2.0 pci9 at ppb8 bus 6 ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13) ppb9: PCI Express 2.0 pci10 at ppb9 bus 16 pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13) pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13) pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13) pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13) pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13) pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13) pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13) pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13) pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13) pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13) pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13) pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13) vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at pci0 dev 20 function 1 not configured vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00) ppb10: PCI Express 1.0 pci11 at ppb10 bus 17 ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00) ppb11: PCI Express 1.0 pci12 at ppb11 bus 2 vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01) uhci0: interrupting at ioapic0 pin 17, event channel 11 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00) uhci1: interrupting at ioapic0 pin 20, event channel 12 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00) uhci2: interrupting at ioapic0 pin 23, event channel 13 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00) uhci3: interrupting at ioapic0 pin 22, event channel 14 usb3 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00) uhci4: interrupting at ioapic0 pin 23, event channel 13 usb4 at uhci4: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00) ehci0: interrupting at ioapic0 pin 20, event channel 12 ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4 usb5 at ehci0: USB revision 2.0 ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90) pci13 at ppb12 bus 1 vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 pckbd_enable: command error drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00) ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. isa0 at ichlpcib0 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors sd0: async, 8-bit transfers, tagged queueing uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 uhidev1 at uhub0 port 1 configuration 1 interface 1 uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 boot device: sd0 root on sd0a dumps on sd0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs ugen0 at uhub2 port 2 ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2 Sat Apr 1 04:41:05 UTC 2017 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: anita-test.netbsd.org IPv6 mode: host Configuring network interfaces: bnx0. Adding interface aliases:. add net default: gateway 10.169.0.1 Building databases: devcprng sysctl: WARNING pseudorandom rekeying. , utmp, utmpx. Starting syslogd. Mounting all filesystems... Clearing temporary files. Updating fontconfig cache: done. Checking quotas: done. swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting xenservices: xenstored, xenconsoled. Apr 1 04:41:12 anita-test xenstored: Checking store ... Apr 1 04:41:12 anita-test xenstored: Checking store complete. WARNING: Failed to open connection to gnttab balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 262144 KiB Setting domain 0 name and domid... /etc/rc.d/xendomains exited with code 1 Starting local daemons:. Updating motd. Starting powerd. Starting sshd. Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/xendomains See /var/run/rc.log for more information. Sat Apr 1 04:41:20 UTC 2017 NetBSD/amd64 (anita-test.netbsd.org) (console) login: NetBSD/amd64 (anita-test.netbsd.org) (console) login: root root Apr 1 04:41:22 anita-test login: ROOT LOGIN (root) on tty console Last login: Sat Apr 1 04:09:39 2017 on console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1.5 (XEN3_DOM0) Welcome to NetBSD! You have mail.  H H H H H H H H HTerminal type is vt100. We recommend that you create a non-root account and use su(1) for root access. anita-test# exec /bin/sh exec /bin/sh anita-test# PS1='anita-root-shell-pr''ompt-1491021440.36# ' PS1='anita-root-shell-pr''ompt-1491021440.36# ' anita-root-shell-prompt-1491021440.36# set -x && ( echo get img | tftp 10.169.0.1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && cat /mnt/test-xen.sh && sh /mnt/test-xen.sh set -x && ( echo get img | tftp 10.169.0. 1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && cat /mnt/test-xen.sh && sh /mnt/test-xen.sh + echo get img + tftp '10.169.0.1' tftp> Received 1048771 bytes in 0.3 seconds tftp> + vnconfig vnd0 img + mount /dev/vnd0a /mnt + cat '/mnt/test-xen.sh' set -ex echo "this is test-xen.sh" netstat -rn -f inet sleep 30 netstat -rn -f inet export PKG_PATH=ftp://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/6.0/All pkg_add py27-anita ( cd /dev sh MAKEDEV vnd4 || true sh MAKEDEV vnd5 || true sh MAKEDEV vnd6 || true sh MAKEDEV vnd7 || true sh MAKEDEV vnd8 || true sh MAKEDEV vnd9 || true sh MAKEDEV vnd10 || true sh MAKEDEV vnd11 || true ) for url in http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/ http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/ http://mirror.araneus.fi/local/2017.03.30.09.16.53/release/amd64/ do ( ver=$(/usr/pkg/bin/python2.7 /mnt/url2ver.py $url) sleep 10 echo "begin" "test of $ver" date sleep 10 anita --vmm=xl --sets kern-GENERIC,modules,base,etc,comp,text,tests test $url >$ver.log 2>&1 || true echo "put $ver.log" | tftp 10.169.0.1 sleep 10 echo "end" "test of $ver" date sleep 10 ) & done wait + sh '/mnt/test-xen.sh' + echo 'this is test-xen.sh' this is test-xen.sh + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS 0 0 - bnx0 10.169.0/24 link#1 UC 1 0 - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc 1 2050 - bnx0 127/8 127.0.0.1 UGRS 0 0 33648 lo0 127.0.0.1 127.0.0.1 UH 1 0 33648 lo0 + sleep 30 + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS 0 0 - bnx0 10.169.0/24 link#1 UC 1 0 - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc 1 2050 - bnx0 127/8 127.0.0.1 UGRS 0 0 33648 lo0 127.0.0.1 127.0.0.1 UH 1 0 33648 lo0 + export 'PKG_PATH=ftp://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/6.0/All' + 'pkg_add' py27-anita pkg_add: Warning: package `py27-anita-1.40nb1' was built for a platform: pkg_add: NetBSD/x86_64 6.0 (pkg) vs. NetBSD/x86_64 6.1.5 (this host) pkg_add: Warning: package `cdrtools-3.01nb1' was built for a platform: pkg_add: NetBSD/x86_64 6.0 (pkg) vs. NetBSD/x86_64 6.1.5 (this host) cdrtools-3.01nb1: copying /usr/pkg/share/examples/cdrtools/cdrecord to /usr/pkg/etc/cdrecord.conf =========================================================================== $NetBSD: MESSAGE.cdrecord.conf,v 1.1.1.1 2006/01/05 23:27:59 wiz Exp $ Note: The location of the cdrtools-3.01 `defaults' file has been set to /usr/pkg/etc/cdrecord.conf This is the pkgsrc standard config file location, NOT the cdrtools-3.01 standard location, which is /etc/default/cdrecord. The reason for this is that pkgsrc packages should not use configuration files outside /usr/pkg unless they are explicitly set by the user. =========================================================================== pkg_add: Warning: package `py27-pexpect-3.0' was built for a platform: pkg_add: NetBSD/x86_64 6.0 (pkg) vs. NetBSD/x86_64 6.1.5 (this host) + cd /dev + sh MAKEDEV vnd4 + sh MAKEDEV vnd5 + sh MAKEDEV vnd6 + sh MAKEDEV vnd7 + sh MAKEDEV vnd8 + sh MAKEDEV vnd9 + sh MAKEDEV vnd10 + sh MAKEDEV vnd11 + wait + '/usr/pkg/bin/python2.7' '/mnt/url2ver.py' 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/' + '/usr/pkg/bin/python2.7' '/mnt/url2ver.py' 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/' + '/usr/pkg/bin/python2.7' '/mnt/url2ver.py' 'http://mirror.araneus.fi/local/2017.03.30.09.16.53/release/amd64/' + 'ver=7.1' + sleep 10 + 'ver=6.1.5' + sleep 10 + 'ver=current-2017.03.30.09.16.53' + sleep 10 + echo begin 'test of 7.1' begin test of 7.1 + date Sat Apr 1 04:42:31 UTC 2017 + sleep 10 + echo begin 'test of 6.1.5' begin test of 6.1.5 + date + echo begin 'test of current-2017.03.30.09.16.53' begin test of current-2017.03.30.09.16.53 + date Sat Apr 1 04:42:31 UTC 2017 + sleep 10 Sat Apr 1 04:42:31 UTC 2017 + sleep 10 + anita --vmm=xl --sets 'kern-GENERIC,modules,base,etc,comp,text,tests' test 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/' + anita --vmm=xl --sets 'kern-GENERIC,modules,base,etc,comp,text,tests' test 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/' + anita --vmm=xl --sets 'kern-GENERIC,modules,base,etc,comp,text,tests' test 'http://mirror.araneus.fi/local/2017.03.30.09.16.53/release/amd64/' balloon0: current reservation: 65536 pages => target: 65536 pages vnd1: unable to open device, error = 16 vnd2: unable to open device, error = 16 xbd backend: attach device vnd1d (size 443708) for domain 1 xbd backend: attach device vnd2d (size 3145728) for domain 1 vnd3: unable to open device, error = 16 vnd4: unable to open device, error = 16 xbd backend: attach device vnd4d (size 3145728) for domain 2 xbd backend: attach device vnd3d (size 537652) for domain 2 vnd5: unable to open device, error = 16 vnd6: unable to open device, error = 16 xbd backend: attach device vnd5d (size 3145728) for domain 3 xbd backend: attach device vnd6d (size 917220) for domain 3 (XEN) grant_table.c:311:d0v0 Increased maptrack size to 2 frames xbd backend: detach device vnd2d for domain 1 xbd backend: detach device vnd1d for domain 1 xbd backend: detach device vnd4d for domain 2 xbd backend: detach device vnd3d for domain 2 vnd1: unable to open device, error = 16 vnd2: unable to open device, error = 16 xbd backend: attach device vnd1d (size 3145728) for domain 4 xbd backend: attach device vnd2d (size 204800) for domain 4 vnd3: unable to open device, error = 16 vnd4: unable to open device, error = 16 xbd backend: attach device vnd3d (size 3145728) for domain 5 xbd backend: attach device vnd4d (size 204800) for domain 5 xbd backend: detach device vnd5d for domain 3 xbd backend: detach device vnd6d for domain 3 vnd5: unable to open device, error = 16 vnd6: unable to open device, error = 16 xbd backend: attach device vnd5d (size 3145728) for domain 6 xbd backend: attach device vnd6d (size 204800) for domain 6 xbd backend: detach device vnd2d for domain 4 xbd backend: detach device vnd1d for domain 4 + true + echo 'put 6.1.5.log' + tftp '10.169.0.1' tftp> Sent 246777 bytes in 0.1 seconds tftp> + sleep 10 + echo end 'test of 6.1.5' end test of 6.1.5 + date Sat Apr 1 05:52:37 UTC 2017 + sleep 10 xbd backend: detach device vnd4d for domain 5 xbd backend: detach device vnd3d for domain 5 + true + echo 'put 7.1.log' + tftp '10.169.0.1' tftp> Sent 343392 bytes in 0.0 seconds tftp> + sleep 10 + echo end 'test of 7.1' end test of 7.1 + date Sat Apr 1 06:26:35 UTC 2017 + sleep 10 xbd backend: detach device vnd6d for domain 6 xbd backend: detach device vnd5d for domain 6 + true + echo 'put current-2017.03.30.09.16.53.log' + tftp '10.169.0.1' tftp> Sent 421773 bytes in 0.0 seconds tftp> + sleep 10 + echo end 'test of current-2017.03.30.09.16.53' end test of current-2017.03.30.09.16.53 + date Sat Apr 1 07:11:48 UTC 2017 + sleep 10 anita-root-shell-prompt-1491021440.36# echo exit_status=$?= echo exit_status=$?= + echo 'exit_status=0=' exit_status=0= anita-root-shell-prompt-1491021440.36# halt halt + halt Apr 1 07:11:58 anita-test halt: halted by root Apr 1 07:11:58 anita-test syslogd[155]: Exiting on signal 15 syncing disks... done brgphy3: detached brgphy2: detached brgphy1: detached brgphy0: detached com1: detached bnx3: detached bnx2: detached bnx1: detached bnx0: detached pci11: detached pci10: detached pci9: detached pci8: detached pci7: detached pci6: detached pci5: detached pci4: detached pci3: detached pci2: detached ppb10: detached pchb12: detached pchb11: detached pchb10: detached pchb9: detached pchb8: detached pchb7: detached pchb6: detached pchb5: detached pchb4: detached pchb3: detached pchb2: detached pchb1: detached ppb9: detached ppb8: detached ppb7: detached ppb6: detached ppb5: detached ppb4: detached ppb3: detached ppb2: detached ppb1: detached pchb0: detached vnd6: detached vnd5: detached vnd4: detached vnd3: detached vnd2: detached vnd1: detached vnd0: detached The operating system has halted. Pl