URLS Calculated size of `./xen-baremetal-work/img': 1048576 bytes, 5 inodes Extent size set to 8192 ./xen-baremetal-work/img: 1.0MB (2048 sectors) block size 8192, fragment size 1024 using 1 cylinder groups of 1.00MB, 128 blks, 64 inodes. super-block backups (for fsck -b #) at: 32, Populating `./xen-baremetal-work/img' Image `./xen-baremetal-work/img' complete This is anita version 1.40 Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/cdrom/boot-com.iso... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/kern-GENERIC.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/modules.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/base.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/etc.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/comp.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/man.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/tests.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/text.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/xbase.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/xcomp.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/xetc.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/xfont.tgz... OK Downloading http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/sets/xserver.tgz... OK makefs -t cd9660 -o rockridge ./xen-baremetal-work/install_tmp.iso ./xen-baremetal-work/download/ sudo noemu \ --workdir \ ./xen-baremetal-work \ --releasedir \ ./xen-baremetal-work/download \ --arch \ amd64 \ --boot-from \ net \ --conf \ ../noemu.conf noemu arguments: ['/usr/local/bin/noemu', '--workdir', './xen-baremetal-work', '--releasedir', './xen-baremetal-work/download', '--arch', 'amd64', '--boot-from', 'net', '--conf', '../noemu.conf'] boot_from: net workdir: ./xen-baremetal-work tftpdir: /home/gson/anita/xen-tests/xen-baremetal-work service ['/usr/pkg/sbin/dhcpd', '-d', '-f', '-cf', './xen-baremetal-work/dhcpd.conf', '-lf', './xen-baremetal-work/dhcpd.leases', 're0'] pid 22236 service ['/usr/sbin/inetd', '-d', './xen-baremetal-work/inetd.conf'] pid 9169 ilo3_power True power on status=0 status_tag=COMMAND COMPLETED Fri Mar 31 21:21:14 2017 Server powering on ....... connected >> NetBSD/x86 PXE boot, Revision 5.1 (from NetBSD 7.1) >> Memory: 552/3668992 k Press return to boot now, any other key for boot menu booting netbsd - starting in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. PXE BIOS Version 2.1 Using PCI device at bus 3 device 0 function 0 Ethernet address e4:11:5b:d3:13:fc |12153600/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+5722488/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+597640\=0x129f630 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.1 (INSTALL.201703111743Z) total memory = 49141 MB avail memory = 47697 MB kern.module.path=/stand/amd64/7.1/modules mainbus0 (root) ACPI: RSDP 0xf4f00 000024 (v02 HP ) ACPI: XSDT 0xdf630140 0000B4 (v01 HP ProLiant 00000002 ?? 0000162E) ACPI: FACP 0xdf630240 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716) ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20131218/tbfadt-716) ACPI: DSDT 0xdf630340 0020BD (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 0xdf62f100 000040 ACPI: SPCR 0xdf62f140 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E) ACPI: MCFG 0xdf62f1c0 00003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 0xdf62f200 000038 (v01 HP ProLiant 00000002 ?? 0000162E) ACPI: FFFF 0xdf62f240 000064 (v02 HP ProLiant 00000002 ?? 0000162E) ACPI: SPMI 0xdf62f2c0 000040 (v05 HP ProLiant 00000001 ?? 0000162E) ACPI: ERST 0xdf62f300 0001D0 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: APIC 0xdf62f500 00015E (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 0xdf62f680 000570 (v01 HP Proliant 00000001 ?? 0000162E) ACPI: FFFF 0xdf62fc00 000176 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: BERT 0xdf62fd80 000030 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: HEST 0xdf62fdc0 0000BC (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: DMAR 0xdf62fe80 00013C (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: SSDT 0xdf632400 000125 (v03 HP CRSPCI0 00000002 HP 00000001) ACPI: SSDT 0xdf632540 0001CF (v03 HP riser1a 00000002 INTL 20061109) ACPI: SSDT 0xdf632740 0003BB (v01 HP pcc 00000001 INTL 20090625) ACPI: SSDT 0xdf632b00 000377 (v01 HP pmab 00000001 INTL 20090625) ACPI: SSDT 0xdf632e80 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109) ACPI: All ACPI Tables successfully acquired ioapic0 at mainbus0 apid 8 ioapic1 at mainbus0 apid 0 cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu1 at mainbus0 apid 32: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu2 at mainbus0 apid 16: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu3 at mainbus0 apid 48: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu4 at mainbus0 apid 4: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu5 at mainbus0 apid 36: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu6 at mainbus0 apid 20: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu7 at mainbus0 apid 52: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu8 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu9 at mainbus0 apid 34: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu10 at mainbus0 apid 18: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu11 at mainbus0 apid 50: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu12 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu13 at mainbus0 apid 33: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu14 at mainbus0 apid 17: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu15 at mainbus0 apid 49: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu16 at mainbus0 apid 5: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu17 at mainbus0 apid 37: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu18 at mainbus0 apid 21: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu19 at mainbus0 apid 53: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu20 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu21 at mainbus0 apid 35: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu22 at mainbus0 apid 19: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu23 at mainbus0 apid 51: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 acpi0 at mainbus0: Intel ACPICA 20131218 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) MOMB (PNP0C02) at acpi0 not configured MI0 (IPI0001) at acpi0 not configured attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (BEEP, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 COMA (PNP0501) at acpi0 not configured PMI0 (ACPI000D) at acpi0 not configured acpitz0 at acpi0 (THM0): cpu0 ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646) attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13) ppb0: PCI Express capability version 2 x4 @ 5.0GT/s pci1 at ppb0 bus 5 ciss0 at pci1 dev 0 function 0: HP Smart Array 11 ciss0: interrupting at ioapic1 pin 4 ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro scsibus0 at ciss0: 1 target, 1 lun per target ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13) ppb1: PCI Express capability version 2 x4 @ 5.0GT/s pci2 at ppb1 bus 12 ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13) ppb2: PCI Express capability version 2 x16 @ 5.0GT/s pci3 at ppb2 bus 9 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13) ppb3: PCI Express capability version 2 x4 @ 5.0GT/s pci4 at ppb3 bus 13 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13) ppb4: PCI Express capability version 2 x4 @ 5.0GT/s pci5 at ppb4 bus 14 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13) ppb5: PCI Express capability version 2 x4 @ 5.0GT/s pci6 at ppb5 bus 15 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13) ppb6: PCI Express capability version 2 x4 @ 5.0GT/s ppb6: link is x4 @ 2.5GT/s pci7 at ppb6 bus 3 bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx0: Ethernet address e4:11:5b:d3:13:fc bnx0: interrupting at ioapic1 pin 6 bnx0: ASIC BCM5709 C0 (0x57092003) bnx0: PCIe x4 2.5Gbps bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx1: Ethernet address e4:11:5b:d3:13:fe bnx1: interrupting at ioapic1 pin 13 bnx1: ASIC BCM5709 C0 (0x57092003) bnx1: PCIe x4 2.5Gbps bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13) ppb7: PCI Express capability version 2 x4 @ 5.0GT/s ppb7: link is x4 @ 2.5GT/s pci8 at ppb7 bus 4 bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx2: Ethernet address e4:11:5b:d3:13:a4 bnx2: interrupting at ioapic1 pin 7 bnx2: ASIC BCM5709 C0 (0x57092003) bnx2: PCIe x4 2.5Gbps bnx2: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx3: Ethernet address e4:11:5b:d3:13:a6 bnx3: interrupting at ioapic1 pin 15 bnx3: ASIC BCM5709 C0 (0x57092003) bnx3: PCIe x4 2.5Gbps bnx3: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13) ppb8: PCI Express capability version 2 x8 @ 5.0GT/s pci9 at ppb8 bus 6 ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13) ppb9: PCI Express capability version 2 x4 @ 5.0GT/s pci10 at ppb9 bus 16 pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13) pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13) pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13) pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13) pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13) pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13) pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13) pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13) pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13) pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13) pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13) pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13) vendor 0x8086 product 0x342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured vendor 0x8086 product 0x3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00) ppb10: PCI Express capability version 1 x4 @ 2.5GT/s pci11 at ppb10 bus 17 ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00) ppb11: PCI Express capability version 1 x1 @ 2.5GT/s pci12 at ppb11 bus 2 vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01) uhci0: interrupting at ioapic0 pin 17 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00) uhci1: interrupting at ioapic0 pin 20 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00) uhci2: interrupting at ioapic0 pin 23 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00) uhci3: interrupting at ioapic0 pin 22 usb3 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00) uhci4: interrupting at ioapic0 pin 23 usb4 at uhci4: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00) ehci0: interrupting at ioapic0 pin 20 ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4 usb5 at ehci0: USB revision 2.0 ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90) pci13 at ppb12 bus 1 vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 pckbd_enable: command error drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00) ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo acpicpu0 at cpu0: ACPI CPU coretemp0 at cpu0: thermal sensor, 1 C resolution acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution acpicpu4 at cpu4: ACPI CPU coretemp4 at cpu4: thermal sensor, 1 C resolution acpicpu5 at cpu5: ACPI CPU coretemp5 at cpu5: thermal sensor, 1 C resolution acpicpu6 at cpu6: ACPI CPU coretemp6 at cpu6: thermal sensor, 1 C resolution acpicpu7 at cpu7: ACPI CPU coretemp7 at cpu7: thermal sensor, 1 C resolution acpicpu8 at cpu8: ACPI CPU coretemp8 at cpu8: thermal sensor, 1 C resolution acpicpu9 at cpu9: ACPI CPU coretemp9 at cpu9: thermal sensor, 1 C resolution acpicpu10 at cpu10: ACPI CPU coretemp10 at cpu10: thermal sensor, 1 C resolution acpicpu11 at cpu11: ACPI CPU coretemp11 at cpu11: thermal sensor, 1 C resolution acpicpu12 at cpu12: ACPI CPU acpicpu13 at cpu13: ACPI CPU acpicpu14 at cpu14: ACPI CPU acpicpu15 at cpu15: ACPI CPU acpicpu16 at cpu16: ACPI CPU acpicpu17 at cpu17: ACPI CPU acpicpu18 at cpu18: ACPI CPU acpicpu19 at cpu19: ACPI CPU acpicpu20 at cpu20: ACPI CPU acpicpu21 at cpu21: ACPI CPU acpicpu22 at cpu22: ACPI CPU acpicpu23 at cpu23: ACPI CPU scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors sd0: async, 8-bit transfers, tagged queueing pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture boot device: bnx0 root on md0a dumps on md0b root file system type: ffs warning: no /dev/console Created tmpfs /dev (1523712 byte, 2944 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                           ugen0 at uhub2 port 2 ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2                                uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ukbd0 at uhidev0      wskbd1 at ukbd0 mux 1 uhidev1 at uhub0 port 1 configuration 1 interface 1 uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0           NetBSD/amd64 7.1  This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.                (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English[14;63 H(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B NetBSD/amd64 7.1  This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.               (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Keyboard type [11;56H(0x(B(0x(B(0x(B(0x(B>a: unchanged(0x(B(0x(B b: US-English(0x(B(0x(B c: UK-English(0x(B(0x(B d: Belgian(0x(B(0x(B e: Czech(0x(B(0x(B f: Danish(0x(B(0x(B g: Dutch(0x(B(0x(B h: Finnish(0x(B(0x(B i: French(0x(B(0x(B j: German(0x(B(0x(B k: Greek(0x(B(0x(B <: page up, >: page down (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B NetBSD/amd64 7.1  This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.               (0 (B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-7.1 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk [16;64H(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?           (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes 8;48H(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to installa NetBSD?                       (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: sd0 (279G, HP LOGICAL VOLUME)(0x(B(0x(B b: Extended partitioning(0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          This disk matches the following BIOS disk:                       BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- ---  0x80 1024 255 32 585871964 299  Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: This is the correct geometry(0x(B[16; 23H(0x(B b: Set the geometry by hand (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B We are now going to install NetBSD on the disk sd0.  NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD.  A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself.         (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Which would you like to do? (0x(B(0x(B(0x(B(0x(B>a: Edit the MBR partition table(0x(B(0x(B b: Use the entire disk(0xb (B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Edit the MBR partition table>b: Use the entire disk Do you want to update the bootcode in the Master Boot Record to the latest version of the NetBSD bootcode?                   (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: Yes(0x(B (0x(B b: No(0x(B(0mqqqqqqqqqqqqqqqj(B NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel.  You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents.  You will then be given the opportunity to change any of the disklabel fields.  The NetBSD part of your disk is 286070 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.            (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitionsa (0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the paciss0: normal state on 'ciss0:0' (online) rtition marked with a '+'.                  MB Cylinders Sectors Filesystem >a: 98323(236926) 22562 201365850 + / b: 4914411277 100647225 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Fr ee space 138602 MB, 12 free partitions. a: 98323(236926) 22562 201365850 + / >b: 49144 11277 100647225 swap b: 49144 11277 100647225 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 138602 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them.                    Start MB End MB Size MB FS type Newfs Mount Mount point  --------- --------- --------- ---------- ----- ----- ----------- a:0 236921 236922 FFSv2 Yes Yes / b: 236922 286069 49148 swap c:0 286069 286070 NetBSD partition d:0 286069 286070 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk                       [LOGICAL VOLUME ]:                          Ok, we are now ready to install NetBSD on your hard disk (sd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed.  Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0b x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes Setting up the DOS partition table ...                                             Status: RunningCommand: disklabel -w -r -f /tmp/disktab sd0 'LOGICAL VOLUME '  --------------------------------------------------------------------------------  Status: Finished                                                  Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 32768 -f 4096 /dev/rsd0a  -------------------------------------------------------------------------------- /dev/rsd0a: 236922.1MB (485216544 sectors) block size 32768, fragment size 4096using 320 cylinder groups of 740.41MB, 23693 blks, 46720 inodes. ............................................................................... Status: Finished                          Would you like to install the normal set of bootblocks or serial bootblocks?  Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console.  Selected bootblock:                  Serial port com0 at 9600 baud(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B a: Use BIOS console(0x(B(0x(B>b: Use serial port com0bx (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B b: Use serial port com0>x: Exit Installing boot blocks on sd0....                                            Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rsd0a /usr/mdec/bootxx_ffsv2  --------------------------------------------------------------------------------  Status: Finished  The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation).                   (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0xd (B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD  The following is the list of distribution sets that will be used. de  - -                   Distribution set Selected  ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected see g i j k ts>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >g: Manual pages NoYes g: Manual pages Yes >i: Test programs NoYes i: Test programs Yes >j: Text processing tools NoYes j: Text processing tools Yes >k: X11 sets None(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Insa b c d e x l tall selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B>a: X11 base and clients No x: Install selected setsYes a: X11 base and clients Yes>b: X11 programming NoYes b: X11 programming Yes>c: X11 configuration NoYes c: X11 configuration Yes>d: X11 fonts NoYes d: X11 fonts Yes>e: X11 servers NoYes e: X11 servers Yes>x: Install selected sets No Yes No Yestools Yes All sets None sets k: X11 sets All >l: Source and debug sets None(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selectex x d sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No Yes No Yestools Yes All sets None sets l: Source and debug sets None >x: Install selected sets Status: Finished Command: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rsd0a /usr/mdec/bootxx_ffsv2  --------------------------------------------------------------------------------                    Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 13, processed 0, Next set kern-GENERIC.                   (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / instc all image media(0x(B(0x(B b: FTP(0x(B(0x(B c: HTTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: CD-ROM / DVD / install image media>c: HTTP The following are the http site, dia 10.169.0.1 b  j rectory, user, and password that will be used. If "user" is "ftp", then the password is not needed.  -                  >a: Host ftp.NetBSD.org b: Base directorypub/NetBSD/NetBSD-7.1 c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No j: Configure network k: Exit x: Get Distribution(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Host: ftp.NetBSD.org 10.169.0.1 The following are the http site, directory, user, and password that will be used. If "user" is "ftp", then the password is not needed.                     a: Host 10.169.0.1 b: Base directorypub/NetBSD/NetBSD-7.1 c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No j: Configure network k: Exit x: Get Distribution a: Host 10.169.0.1 >b: Base directory pub/NetBSD/NetBSD-7.1(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Base directory: pub/NetBSD/NetBSD-7.1  The following are the http site, directory, user, and password that will be used. If "user" is "ftp", then the password is not needed.                     a: Host10.169.0.1 >b: Base directory c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No j: Configure network k: Exit x: Get Distribution b: Base directory>j: Configure network Which network device would you like to use?           >          (0lqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available interfaces (0x(B(0x(B(0x(B(0x(B>a: bnx0a [27m(0x(B(0x(B b: bnx1(0x(B(0x(B c: bnx2(0x(B(0x(B d: bnx3(0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqj(B To be able to use the network, we need answers to the following:            >           Network media type [ autoselect]: (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Perform autoconfiguration? (0x(B(0x(B(0x(B(0x(B>a: Yes(0x(B(0x(B b: Nob (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Yes>b: No Your host name(0anita-test (B(0 (B (0 (B(0 (B(0 (B(0 (B (0 (B(0 (B (0 (B(0 (B: a an ani anit anita anita- anita-t anita-te anita-tes anita-test  Your DNS domain: netbsd.org n ne net netb netbs netbsd netbsd. netbsd.o netbsd.or netbsd.org  Your IPv4 address[4410.169.0.2 m: 1 10 10. 10.1 10.16 10.169 10.169. 10.169.0 10.169.0. 10.169.0.2  IPv4 Netmask [255.255.255.0 0xff000000]: 2 25 255 255. 255.2 255.25 255.255 255.255. 255.255.2 255.255.25 255.255.255 255.255.255. 255.255.255.0  IPv4 gateway[4410.169.0.1 m: 1 10 10. 10.1 10.16 10.169 10.169. 10.169.0 10.169.0. 10.169.0.1 (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select DNS server (0x(B(0x(B  (0x(B(0x(B>a: google-public-dns-a.google.com (IPv4)(0x(B(0x(B b: google-public-dns-b.google.com (IPv4) (0x(B(0x(B c: google-public-dns-a.google.com (IPv6) (0x(B(0x(B d: google-public-dns-b.google.com (IPv6) (0x(B(0x(B e: othere 10.0.1.1 (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: google-public-dns-a.google.com (IPv4)>e: other  Your name server(0 (B(0 (B (0 (B(0 (B(0 (B(0 (B (0 (B(0 (B (0 (B(0 (B (0 (B(0 (B (0 (B(0 (B (0 (B(0 (B: 1 10 10. 10.0 10.0. 10.0.1 10.0.1. 10.0.1.1  The following are the values you entered.  DNS Domain: netbsd.org Host Name: anita-test Nameserver: 10.0.1.1 Primary Interface: bnx0 Media type: autoselect Host IP: 10.169.0.2 Netmask: 255.255.255.0 IPv4 Gateway: 10.169.0.1   >          IPv6 autoconf: (0lqqqqqqqqqqqqqqqqqk(B(0x(B Are they OK? (0x(B(0x(B(0x(B(0x(B>a: Yes 9H(0x(B(0x(B b: No(0x(B(0mqqqqqqqqqqqqqqqqqj(B                         Status: RunningCommand: /sbin/route -n flush -inet  --------------------------------------------------------------------------------  Status: Finished                                                  Status: RunningCommand: /sbin/route -n add default 10.169.0.1  -------------------------------------------------------------------------------- add net default: gateway 10.169.0.1  Status: Finished                          Waiting while network interface comes up.                          Status: RunningCommand: /sbin/ping -v -c 5 -w 5 -o -n 10.169.0.1  -------------------------------------------------------------------------------- PING 10.169.0.1 (10.169.0.1): 56 data bytes 64 bytes from 10.169.0.1: icmp_seq=0 ttl=255 time=0.152666 ms  ----10.169.0.1 PING Statistics---- 1 packets transmitted, 1 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 0.152666/0.152666/0.152666/0.000000 ms  Status: Finished                                                  Status: RunningCommand: /sbin/ping -v -c 5 -w 5 -o -n 10.0.1.1  -------------------------------------------------------------------------------- PING 10.0.1.1 (10.0.1.1): 56 data bytes 64 bytes from 10.0.1.1: icmp_seq=0 ttl=254 time=0.629173 ms  ----10.0.1.1 PING Statistics---- 1 packets transmitted, 1 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 0.629173/0.629173/0.629173/0.000000 ms  Status: Finished                          The following are the http site, directory, user, and password that will be used. If "user" is "ftp", then the password is not needed.                      a: Host10.169.0.1 b: Base directory c: Binary set directory /amd64/binary/sets d: Source set directory /source/sets e: Userftp f: Password g: Proxy h: Transfer directory/usr/INSTALL i: Delete after install No >j: Configure network k: Exit x: Get Distribution H j: Configure network >x: Get Distribution                         Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/kern-GENERIC.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/kern-GENERIC.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 7044 KiB 47.00 M00:00 7214042 bytes retrieved in 00:00 (46.97 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/kern-GENERIC.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 17400 KiB 119.53 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/modules.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/modules.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5957 KiB 46.85 M00:00 6100919 bytes retrieved in 00:00 (46.81 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/modules.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 20750 KiB 113.89 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/base.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/base.tgz 0% || 00.00 KiB/s --:-- ETA87% |******************************47904 KiB 46.45 M00:00 ETA100*****| 5452351 55832167 bytes retrieved in 00:01 (46.51 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/base.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA58% |********************93056 KiB 90.62 M00:00 ETA100***************| 154 M29  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/etc.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/etc.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 569 KiB 47.38 M00:00 583065 bytes retrieved in 00:00 (46.76 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/etc.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 3700 KiB 75.94 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/comp.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/comp.tgz 0% || 00.00 KiB/s --:-- ETA47% |****************48512 KiB 47.02 M00:01 ETA95***************** | 965446.950 ETA100**| 98 M7 103686212 bytes retrieved in 00:02 (46.96 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/comp.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA33% |***********116 MiB 115.77 M00:02 ETA68************2409.190 ETA93*********32508.129** | 348 MiB 86.75100*51  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/man.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/man.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 10620 KiB 46.97 M00:00 10875648 bytes retrieved in 00:00 (46.95 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/man.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 50890 KiB 61.22 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/tests.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/tests.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 6468 KiB 46.66 M00:00 6623438 bytes retrieved in 00:00 (46.62 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/tests.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 22750 KiB 63.14 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/text.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/text.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 2733 KiB 47.12 M00:00 2798960 bytes retrieved in 00:00 (47.02 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/text.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 13120 KiB 62.87 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xbase.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xbase.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 6974 KiB 47.29 M00:00 7141448 bytes retrieved in 00:00 (45.76 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xbase.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23070 KiB 88.19 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xcomp.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xcomp.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 13813 KiB 47.39 M00:00 14145469 bytes retrieved in 00:00 (47.37 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xcomp.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 57920 KiB 93.53 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xetc.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xetc.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 2380241.12 M00:00 23802 bytes retrieved in 00:00 (32.66 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xetc.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 150 KiB 22.09 M00:00  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xfont.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xfont.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 32014 KiB 47.31 M00:00 32782614 bytes retrieved in 00:00 (47.30 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xfont.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA88% |******************************66432 KiB 64.74 M00:00 ETA100*****| 754706.06  Status: Finished                                                  Status: RunningCommand: /usr/bin/ftp -a http://10.169.0.1/amd64/binary/sets/xserver.tgz  -------------------------------------------------------------------------------- Requesting http://10.169.0.1/amd64/binary/sets/xserver.tgz 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 12728 KiB 46.98 M00:00 13033715 bytes retrieved in 00:00 (46.95 MiB/s)  Status: Finished                                                  Status: RunningCommand: progress -zf /targetroot/usr/INSTALL/xserver.tgz tar --chroot -xhepf -  -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 36200 KiB 118.39 M00:00  Status: Finished                          All selected distribution sets unpacked successfully.                         Making device nodes ... (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B Is the network information you entered accurate for this machine (0x(B (0x(B in regular operation and do you want it installed in /etc?(0x(B (0x(B(0x(B (0x(B>a: Yes 5H(0x(B (0x(B b: No(0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         Status: RunningCommand: /etc/rc.d/random_seed stop  -------------------------------------------------------------------------------- Saved entropy to /var/db/entropy-file.  Status: Finished                          The extraction of the selected sets for NetBSD-7.1 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first.                    (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x( B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B  The extraction of the selected sets for NetBSD-7.1 is complete. The system  is now able to boot from the selected hard disk. To complete the  installation, sysinst will give you the opportunity to configure some  essential things first.       (0lqqqqqqqqqqqqqqqqqqqqqqqk(B  (0x(B>Hit enter to continue (0x(B  (0mqqqqqqqqqqqqqqqqqqqqqqqj(B                                      Configure the additional items as needed.                        a: Configure networkconfigure b: TimezoneUTC c: Root shell/bin/sh d: Change root password***EMPTY*** e: Enable installation of binary packagesinstall f: Fetch and unpack pkgsrc for building from source install g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO k: Enable xdmNO l: Enable cgdYES m: Enable lvmNO n: Enable raidframeYES o: Add a user >x: Finished configuringx  The installation of NetBSD-7.1 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8)  manpage; it contains a list of things to be checked after the first complete  boot.  At a minimum, you should edit /etc/rc.conf to match your needs. See  /etc/defaults/rc.conf for the default values.               (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x (B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B                         Status: RunningCommand: /sbin/umount /targetroot/  --------------------------------------------------------------------------------  Status: Finished                          NetBSD/amd64 7.1  This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.                  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-7.1 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install Systemx [27m [?25h# halt x x: not found # halt halt halted by root This is anita version 1.40 sudo noemu \ --workdir \ ./xen-baremetal-work \ --releasedir \ ./xen-baremetal-work/download \ --arch \ amd64 \ --boot-from \ disk \ --conf \ ../noemu.conf noemu arguments: ['/usr/local/bin/noemu', '--workdir', './xen-baremetal-work', '--releasedir', './xen-baremetal-work/download', '--arch', 'amd64', '--boot-from', 'disk', '--conf', '../noemu.conf'] boot_from: disk workdir: ./xen-baremetal-work tftpdir: /home/gson/anita/xen-tests/xen-baremetal-work service ['/usr/sbin/inetd', '-d', './xen-baremetal-work/inetd.conf'] pid 27364 ilo3_power True power on status=0 status_tag=COMMAND COMPLETED Fri Mar 31 21:28:47 2017 Server powering on ....... connected >> NetBSD/x86 BIOS Boot, Revision 5.10 (from NetBSD 7.1) >> Memory: 637/3668992 k 1. Boot normally 2. Boot single user 3. Disable ACPI 4. Disable ACPI and SMP 5. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-\|/-\14221568|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+654648\|/-\|/-\|/-\|/-\|/-+594632\| [1027320/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+719300/-\|/-\|/-\|/-\|/-\|/-\]=0x116d090 |/-\|/-\|/-\|/-\|/-\|/-\Loading /var/db/entropy-file Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.1 (GENERIC.201703111743Z) total memory = 49141 MB avail memory = 47698 MB kern.module.path=/stand/amd64/7.1/modules mainbus0 (root) ACPI: RSDP 0xf4f00 000024 (v02 HP ) ACPI: XSDT 0xdf630140 0000B4 (v01 HP ProLiant 00000002 ?? 0000162E) ACPI: FACP 0xdf630240 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716) ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20131218/tbfadt-716) ACPI: DSDT 0xdf630340 0020BD (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 0xdf62f100 000040 ACPI: SPCR 0xdf62f140 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E) ACPI: MCFG 0xdf62f1c0 00003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 0xdf62f200 000038 (v01 HP ProLiant 00000002 ?? 0000162E) ACPI: FFFF 0xdf62f240 000064 (v02 HP ProLiant 00000002 ?? 0000162E) ACPI: SPMI 0xdf62f2c0 000040 (v05 HP ProLiant 00000001 ?? 0000162E) ACPI: ERST 0xdf62f300 0001D0 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: APIC 0xdf62f500 00015E (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 0xdf62f680 000570 (v01 HP Proliant 00000001 ?? 0000162E) ACPI: FFFF 0xdf62fc00 000176 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: BERT 0xdf62fd80 000030 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: HEST 0xdf62fdc0 0000BC (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: DMAR 0xdf62fe80 00013C (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: SSDT 0xdf632400 000125 (v03 HP CRSPCI0 00000002 HP 00000001) ACPI: SSDT 0xdf632540 0001CF (v03 HP riser1a 00000002 INTL 20061109) ACPI: SSDT 0xdf632740 0003BB (v01 HP pcc 00000001 INTL 20090625) ACPI: SSDT 0xdf632b00 000377 (v01 HP pmab 00000001 INTL 20090625) ACPI: SSDT 0xdf632e80 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109) ACPI: All ACPI Tables successfully acquired ioapic0 at mainbus0 apid 8 ioapic1 at mainbus0 apid 0 cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu1 at mainbus0 apid 32: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu2 at mainbus0 apid 16: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu3 at mainbus0 apid 48: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu4 at mainbus0 apid 4: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu5 at mainbus0 apid 36: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu6 at mainbus0 apid 20: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu7 at mainbus0 apid 52: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu8 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu9 at mainbus0 apid 34: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu10 at mainbus0 apid 18: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu11 at mainbus0 apid 50: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu12 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu13 at mainbus0 apid 33: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu14 at mainbus0 apid 17: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu15 at mainbus0 apid 49: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu16 at mainbus0 apid 5: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu17 at mainbus0 apid 37: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu18 at mainbus0 apid 21: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu19 at mainbus0 apid 53: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu20 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu21 at mainbus0 apid 35: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu22 at mainbus0 apid 19: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 cpu23 at mainbus0 apid 51: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 acpi0 at mainbus0: Intel ACPICA 20131218 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) MOMB (PNP0C02) at acpi0 not configured MI0 (IPI0001) at acpi0 not configured attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (BEEP, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 COMA (PNP0501) at acpi0 not configured PMI0 (ACPI000D) at acpi0 not configured acpitz0 at acpi0 (THM0): cpu0 ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646) attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13) ppb0: PCI Express capability version 2 x4 @ 5.0GT/s pci1 at ppb0 bus 5 ciss0 at pci1 dev 0 function 0: HP Smart Array 11 ciss0: interrupting at ioapic1 pin 4 ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro scsibus0 at ciss0: 1 target, 1 lun per target ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13) ppb1: PCI Express capability version 2 x4 @ 5.0GT/s pci2 at ppb1 bus 12 ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13) ppb2: PCI Express capability version 2 x16 @ 5.0GT/s pci3 at ppb2 bus 9 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13) ppb3: PCI Express capability version 2 x4 @ 5.0GT/s pci4 at ppb3 bus 13 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13) ppb4: PCI Express capability version 2 x4 @ 5.0GT/s pci5 at ppb4 bus 14 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13) ppb5: PCI Express capability version 2 x4 @ 5.0GT/s pci6 at ppb5 bus 15 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13) ppb6: PCI Express capability version 2 x4 @ 5.0GT/s ppb6: link is x4 @ 2.5GT/s pci7 at ppb6 bus 3 bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx0: Ethernet address e4:11:5b:d3:13:fc bnx0: interrupting at ioapic1 pin 6 bnx0: ASIC BCM5709 C0 (0x57092003) bnx0: PCIe x4 2.5Gbps bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx1: Ethernet address e4:11:5b:d3:13:fe bnx1: interrupting at ioapic1 pin 13 bnx1: ASIC BCM5709 C0 (0x57092003) bnx1: PCIe x4 2.5Gbps bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13) ppb7: PCI Express capability version 2 x4 @ 5.0GT/s ppb7: link is x4 @ 2.5GT/s pci8 at ppb7 bus 4 bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx2: Ethernet address e4:11:5b:d3:13:a4 bnx2: interrupting at ioapic1 pin 7 bnx2: ASIC BCM5709 C0 (0x57092003) bnx2: PCIe x4 2.5Gbps bnx2: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx3: Ethernet address e4:11:5b:d3:13:a6 bnx3: interrupting at ioapic1 pin 15 bnx3: ASIC BCM5709 C0 (0x57092003) bnx3: PCIe x4 2.5Gbps bnx3: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13) ppb8: PCI Express capability version 2 x8 @ 5.0GT/s pci9 at ppb8 bus 6 ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13) ppb9: PCI Express capability version 2 x4 @ 5.0GT/s pci10 at ppb9 bus 16 pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13) pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13) pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13) pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13) pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13) pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13) pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13) pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13) pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13) pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13) pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13) pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13) vendor 0x8086 product 0x342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured vendor 0x8086 product 0x3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00) ppb10: PCI Express capability version 1 x4 @ 2.5GT/s pci11 at ppb10 bus 17 ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00) ppb11: PCI Express capability version 1 x1 @ 2.5GT/s pci12 at ppb11 bus 2 vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01) uhci0: interrupting at ioapic0 pin 17 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00) uhci1: interrupting at ioapic0 pin 20 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00) uhci2: interrupting at ioapic0 pin 23 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00) uhci3: interrupting at ioapic0 pin 22 usb3 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00) uhci4: interrupting at ioapic0 pin 23 usb4 at uhci4: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00) ehci0: interrupting at ioapic0 pin 20 ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4 usb5 at ehci0: USB revision 2.0 ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90) pci13 at ppb12 bus 1 vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 pckbd_enable: command error drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00) ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo acpicpu0 at cpu0: ACPI CPU coretemp0 at cpu0: thermal sensor, 1 C resolution acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution acpicpu4 at cpu4: ACPI CPU coretemp4 at cpu4: thermal sensor, 1 C resolution acpicpu5 at cpu5: ACPI CPU coretemp5 at cpu5: thermal sensor, 1 C resolution acpicpu6 at cpu6: ACPI CPU coretemp6 at cpu6: thermal sensor, 1 C resolution acpicpu7 at cpu7: ACPI CPU coretemp7 at cpu7: thermal sensor, 1 C resolution acpicpu8 at cpu8: ACPI CPU coretemp8 at cpu8: thermal sensor, 1 C resolution acpicpu9 at cpu9: ACPI CPU coretemp9 at cpu9: thermal sensor, 1 C resolution acpicpu10 at cpu10: ACPI CPU coretemp10 at cpu10: thermal sensor, 1 C resolution acpicpu11 at cpu11: ACPI CPU coretemp11 at cpu11: thermal sensor, 1 C resolution acpicpu12 at cpu12: ACPI CPU acpicpu13 at cpu13: ACPI CPU acpicpu14 at cpu14: ACPI CPU acpicpu15 at cpu15: ACPI CPU acpicpu16 at cpu16: ACPI CPU acpicpu17 at cpu17: ACPI CPU acpicpu18 at cpu18: ACPI CPU acpicpu19 at cpu19: ACPI CPU acpicpu20 at cpu20: ACPI CPU acpicpu21 at cpu21: ACPI CPU acpicpu22 at cpu22: ACPI CPU acpicpu23 at cpu23: ACPI CPU scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors sd0: async, 8-bit transfers, tagged queueing uhidev0 at uhub4 port 1 configuration 1 interface 0 uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 uhidev1 at uhub4 port 1 configuration 1 interface 1 uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playbackugen0 at uhub3, capture port 2 ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2 boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs Fri Mar 31 20:32:57 UTC 2017 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: Loaded entropy from /var/db/entropy-file. Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: anita-test.netbsd.org IPv6 mode: host Configuring network interfaces: bnx0. Adding interface aliases:. add net default: gateway 10.169.0.1 Waiting for DAD completion for statically configured addresses... Building databases: dev, utmp, utmpx, services. Starting syslogd. Mounting all file systems... Clearing temporary files. Updating fontconfig cache: done. Checking quotas: done. swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db) Starting inetd. Starting cron. Fri Mar 31 20:33:12 UTC 2017 NetBSD/amd64 (anita-test.netbsd.org) (console) login: NetBSD/amd64 (anita-test.netbsd.org) (console) login: root root Mar 31 20:33:14 anita-test login: ROOT LOGIN (root) on tty console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.1 (GENERIC.201703111743Z) Welcome to NetBSD!  H H H H H H H H HTerminal type is vt100. We recommend that you create a non-root account and use su(1) for root access. anita-test# exec /bin/sh exec /bin/sh anita-test# PS1='anita-root-shell-pr''ompt-1490992155.42# ' PS1='anita-root-shell-pr''ompt-1490992155.42# ' anita-root-shell-prompt-1490992155.42# set -x && ( echo get img | tftp 10.169.0.1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && sh /mnt/install-xen.sh set -x && ( echo get img | tftp 10.169.0. 1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && sh /mnt/install-xen.sh + + echo get img tftp '10.169.0.1' tftp> Received 1048771 bytes in 0.1 seconds tftp> + vnconfig vnd0 img + mount /dev/vnd0a /mnt + sh '/mnt/install-xen.sh' + echo 'this is install-xen.sh' this is install-xen.sh + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS - - - bnx0 10.169.0/24 link#1 UC - - - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc - - - bnx0 127/8 127.0.0.1 UGRS - - 33648 lo0 127.0.0.1 127.0.0.1 UH - - 33648 lo0 + sleep 30 + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS - - - bnx0 10.169.0/24 link#1 UC - - - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc - - - bnx0 127/8 127.0.0.1 UGRS - - 33648 lo0 127.0.0.1 127.0.0.1 UH - - 33648 lo0 + ed '/etc/ssh/sshd_config' 3739 #PermitRootLogin no #X11Forwarding no 3739 + echo sshd=YES + '/etc/rc.d/sshd' start Generating public/private rsa1 key pair. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: SHA256:oroku1lmLe8kqFveTAkP91TCTOq9zeslajsE/ezs6YM root@anita-test.netbsd.org The key's randomart image is: +---[RSA1 2048]---+ | . | | = | | ..+ . | | ....o | | o o.+oS | | . * =.=o | |o O B.o++ . | |.@ X E.+= | |*o+o=.o**. | +----[SHA256]-----+ Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: SHA256:WSMnuc1H1VfX1QXvplvBemN0xgdvHEOuNphdHQXkevI root@anita-test.netbsd.org The key's randomart image is: +---[DSA 1024]----+ | .=*&| | . oo.O| | + + . o=+| | X o+.+*o| | S oo+=.+@| | ..++=+| | .E+.| | oo.| | . | +----[SHA256]-----+ Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: SHA256:s1Rgwua51wqVrtfqd/uMialKJ3JkmhIa6dhyEmiQA/M root@anita-test.netbsd.org The key's randomart image is: +---[ECDSA 521]---+ |o .. o | |.+ oo . | |+ E o . .. | |oo o o. | |=.. o+S. | |+= . =o.oo. | |=.+ + ++oo | | + . +.oo oo.+ | | .+++o.+oo | +----[SHA256]-----+ Generating public/private ed25519 key pair. Your identification has been saved in /etc/ssh/ssh_host_ed25519_key. Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub. The key fingerprint is: SHA256:yvMPYqc0rT2bAFX5EyiFdcCBvILRrBsp2ehYW87if8U root@anita-test.netbsd.org The key's randomart image is: +--[ED25519 256]--+ | o . **=. | | . o =.+.. | | + = .o . . | |+ B o.. o | |oo B.. .S . | |..+ oo oE | | . . X.+ | | . o.@.o | | ...o =+. | +----[SHA256]-----+ Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: SHA256:3VhRXaTLsQHE/7dysJ321wJ5tNPRFh7taaTsP0C6Pt4 root@anita-test.netbsd.org The key's randomart image is: +---[RSA 2048]----+ | o+..o=| | .o =o| | o.B.=| | . + =oX+| | S o =o==.| | .o++ +| | .o*.=| | o.o.Oo| | oo.E+.=| +----[SHA256]-----+ Starting sshd. + echo 'tmpfs /tmp tmpfs rw' + mount /tmp + echo + 'comps=kernel tools' + export 'PKG_PATH=ftp://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/7.0/All' + pkg=xenkernel42 + 'pkg_add' xenkernel42 pkg_add: Warning: package `xenkernel42-4.2.5nb15' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) =========================================================================== $NetBSD: MESSAGE,v 1.1.1.1 2013/05/15 05:32:12 jnemeth Exp $ The Xen hypervisor is installed under the following locations: /usr/pkg/xen42-kernel/xen.gz (standard hypervisor) /usr/pkg/xen42-kernel/xen-debug.gz (debug hypervisor) =========================================================================== + r=true + eval 'xenkernel_binary_pkg_ok=true' + 'xenkernel_binary_pkg_ok=true' + eval echo 'xenkernel_binary_pkg_ok=true' + echo 'xenkernel_binary_pkg_ok=true' xenkernel_binary_pkg_ok=true + 'pkg_delete' -R xenkernel42 + pkg=xentools42 + 'pkg_add' xentools42 pkg_add: Warning: package `xentools42-4.2.5nb20' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `py27-curses-2.7.12nb2' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `python27-2.7.12nb4' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `mozilla-rootcerts-1.0.20160610' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) =========================================================================== $NetBSD: MESSAGE,v 1.5 2014/08/10 10:47:42 wiz Exp $ Execute this command to extract and rehash all CA root certificates distributed by the Mozilla Project, so that they can be used by third party applications using OpenSSL. It also creates a single file certificate bundle in PEM format which can be used by applications using GnuTLS. # mozilla-rootcerts install To mark these certificates as trusted for users of gnupg2, do the following (assuming default PKG_SYSCONFBASE and a Bourne shell): # mkdir -p /usr/pkg/etc/gnupg # cd /usr/pkg/etc/gnupg # for c in /etc/openssl/certs/*.pem; do > openssl x509 -in $c -noout -fingerprint|sed 's|^.*=\(.*\)|\1 S|' > done > trustlist.txt =========================================================================== pkg_add: Warning: package `libffi-3.2.1nb2' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) libffi-3.2.1nb2: registering info file /usr/pkg/info/libffi.info pkg_add: Warning: package `ncurses-6.0nb3' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `py27-lxml-3.7.0' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `py27-setuptools-32.1.0' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `py27-expat-2.7.12' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `libxml2-2.9.4nb2' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `xmlcatmgr-2.2nb1' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.etc.sgml to /usr/pkg/etc/sgml/catalog xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.etc.xml to /usr/pkg/etc/xml/catalog xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.share.sgml to /usr/pkg/share/sgml/catalog xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.share.xml to /usr/pkg/share/xml/catalog =========================================================================== $NetBSD: MESSAGE,v 1.5 2004/01/23 17:12:16 jmmv Exp $ The following catalogs have been installed: * /usr/pkg/etc/sgml/catalog System wide SGML catalog. Can be edited by the administrator and is not changed by packages. This is the *default* catalog when working in SGML mode. * /usr/pkg/etc/xml/catalog System wide XML catalog. Can be edited by the administrator and is not changed by packages. This is the *default* catalog when working in XML mode. * /usr/pkg/share/sgml/catalog Handles SGML stuff installed under /usr/pkg/share/sgml. Automatically handled by packages. * /usr/pkg/share/xml/catalog Handles XML stuff installed under /usr/pkg/share/xml. Automatically handled by packages. =========================================================================== pkg_add: Warning: package `libxslt-1.1.29nb1' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `libgcrypt-1.7.4' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `libgpg-error-1.25' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) libgpg-error-1.25: registering info file /usr/pkg/info/gpgrt.info libgcrypt-1.7.4: registering info file /usr/pkg/info/gcrypt.info pkg_add: Warning: package `py27-xml-0.8.4nb5' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `ocaml-4.03.0nb2' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `ocaml-findlib-1.7.1' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) ocaml-findlib-1.7.1: copying /usr/pkg/share/examples/ocaml-findlib/ocamlfind.conf to /usr/pkg/etc/ocamlfind.conf pkg_add: Warning: package `glib2-2.50.2' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `perl-5.24.0' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `libelf-0.8.13nb1' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `pcre-8.39' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) No schema files found: doing nothing. pkg_add: Warning: package `yajl-2.1.0' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) Trying to reconnect ftp://ftp.netbsd.org:21/pub/pkgsrc/packages/NetBSD/amd64/7.0/All/xentools42-4.2.5nb20.tgz xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/formats to /usr/pkg/etc/xen/formats xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/oxenstored.conf to /usr/pkg/etc/xen/oxenstored.conf xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/scripts/block to /usr/pkg/etc/xen/scripts/block xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/scripts/hotplugpath.sh to /usr/pkg/etc/xen/scripts/hotplugpath.sh xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/scripts/locking.sh to /usr/pkg/etc/xen/scripts/locking.sh xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/scripts/qemu-ifup to /usr/pkg/etc/xen/scripts/qemu-ifup xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/scripts/vif-bridge to /usr/pkg/etc/xen/scripts/vif-bridge xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/scripts/vif-ip to /usr/pkg/etc/xen/scripts/vif-ip xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/xend-config.sxp to /usr/pkg/etc/xen/xend-config.sxp xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/xl.conf to /usr/pkg/etc/xen/xl.conf xentools42-4.2.5nb20: copying /usr/pkg/share/examples/xen/xm-config.xml to /usr/pkg/etc/xen/xm-config.xml =========================================================================== The following files should be created for xentools42-4.2.5nb20: /etc/rc.d/xendomains (m=0755) [/usr/pkg/share/examples/rc.d/xendomains] /etc/rc.d/xend (m=0755) [/usr/pkg/share/examples/rc.d/xend] /etc/rc.d/xencommons (m=0755) [/usr/pkg/share/examples/rc.d/xencommons] /etc/rc.d/xen-watchdog (m=0755) [/usr/pkg/share/examples/rc.d/xen-watchdog] =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.2 2013/05/19 22:18:05 jnemeth Exp $ Please note that the xm command is deprecated in this version of Xen and is likely to go away in the near future. It still functions, but you should consider switching to the xl command, which is now functional on NetBSD. The xend rcd script provides support for xm command and should only be activated if you plan on using the xm command. Also note that the rc.d scripts have been updated in this version. If you don't use PKG_RCD_SCRIPTS=YES then it is very important for you to copy the new rc.d scripts to /etc/rc.d. =========================================================================== =========================================================================== $NetBSD: MESSAGE.NetBSD,v 1.1 2013/05/15 06:58:50 jnemeth Exp $ Please ensure that the Xen-specific devices needed by xend(8) exist: cd /dev && sh MAKEDEV xen There are example configuration files for setting up a guest domain in: /usr/pkg/share/examples/xen/ Please also refer to the the "NetBSD/xen How-To" for more information on creating a Xen setup: http://www.NetBSD.org/ports/xen/howto.html =========================================================================== + r=true + eval 'xentools_binary_pkg_ok=true' + 'xentools_binary_pkg_ok=true' + eval echo 'xentools_binary_pkg_ok=true' + echo 'xentools_binary_pkg_ok=true' xentools_binary_pkg_ok=true + 'pkg_delete' -R xentools42 original MD5 checksum failed, not deleting: /usr/pkg/lib/ocaml/ld.conf pkg_delete: couldn't entirely delete package `ocaml-4.03.0nb2' libgcrypt-1.7.4: unregistering info file /usr/pkg/info/gcrypt.info libgpg-error-1.25: unregistering info file /usr/pkg/info/gpgrt.info libffi-3.2.1nb2: unregistering info file /usr/pkg/info/libffi.info + sysctl -n 'hw.ncpu' + echo 'MAKE_JOBS=24' + echo WRKOBJDIR=/tmp + unset 'PKG_PATH' + cd /usr + time ftp 'http://mirror.araneus.fi/ftp.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz' Requesting http://mirror.araneus.fi/ftp.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz 0% | | 0 0.00 KiB/s --:-- ETA 83% |***************************** | 48128 KiB 46.84 MiB/s 00:00 ETA100% |***********************************| 57980 KiB 46.88 MiB/s 00:00 ETA 59371743 bytes retrieved in 00:01 (46.87 MiB/s) 1.45 real 0.00 user 0.27 sys + time tar xfz 'pkgsrc.tar.gz' 4908.08 real 3.72 user 30.46 sys + cd /usr/pkgsrc/sysutils + pkg=xenkernel42 + cd xenkernel42 + make install + r=true + echo 'alles gut' alles gut + eval 'xenkernel_source_pkg_ok=true' + 'xenkernel_source_pkg_ok=true' + eval echo 'xenkernel_source_pkg_ok=true' + echo 'xenkernel_source_pkg_ok=true' xenkernel_source_pkg_ok=true + cd '..' + pkg=xentools42 + cd xentools42 + make install + r=true + echo 'alles gut' alles gut + eval 'xentools_source_pkg_ok=true' + 'xentools_source_pkg_ok=true' + eval echo 'xentools_source_pkg_ok=true' + echo 'xentools_source_pkg_ok=true' xentools_source_pkg_ok=true + cd '..' + cp '/usr/pkg/xen42-kernel/xen.gz' '/usr/pkg/xen42-kernel/xen-debug.gz' / + cp '/usr/pkg/share/examples/rc.d/xendomains' '/etc/rc.d/' + cp '/usr/pkg/share/examples/rc.d/xencommons' '/etc/rc.d/' + cd /dev + sh MAKEDEV xen + cd / + ftp 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/kernel/netbsd-XEN3_DOM0.gz' Requesting http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/binary/kernel/netbsd-XEN3_DOM0.gz 0% | | 0 0.00 KiB/s --:-- ETA100% |***********************************| 5284 KiB 28.12 MiB/s 00:00 ETA 5411457 bytes retrieved in 00:00 (28.11 MiB/s) + ed '/boot.cfg' 319 menu=Boot normally:rndseed /var/db/entropy-file;boot netbsd 433 + cat + echo 'Xen installation successful' Xen installation successful anita-root-shell-prompt-1490992155.42# echo exit_status=$?= echo exit_status=$?= + echo 'exit_status=0=' exit_status=0= anita-root-shell-prompt-1490992155.42# halt halt + halt Mar 31 22:50:34 anita-test halt: halted by root Mar 31 22:50:35 anita-test syslogd[199]: Exiting on signal 15 syncing disks... done brgphy3: detached brgphy2: detached brgphy1: detached brgphy0: detached com1: detached bnx3: detached bnx2: detached bnx1: detached bnx0: detached pci11: detached pci10: detached pci9: detached pci8: detached pci7: detached pci6: detached pci5: detached pci4: detached pci3: detached pci2: detached sysbeep0: detached midi0: detached ppb10: detached pchb12: detached pchb11: detached pchb10: detached pchb9: detached pchb8: detached pchb7: detached pchb6: detached pchb5: detached pchb4: detached pchb3: detached pchb2: detached pchb1: detached ppb9: detached ppb8: detached ppb7: detached ppb6: detached ppb5: detached ppb4: detached ppb3: detached ppb2: detached ppb1: detached pchb0: detached audio0: detached vnd0: detached sd0: detached scsibus0: detached The operating system has halted. Please pressThis is anita version 1.40 sudo noemu \ --workdir \ ./xen-baremetal-work \ --releasedir \ ./xen-baremetal-work/download \ --arch \ amd64 \ --boot-from \ disk \ --conf \ ../noemu.conf noemu arguments: ['/usr/local/bin/noemu', '--workdir', './xen-baremetal-work', '--releasedir', './xen-baremetal-work/download', '--arch', 'amd64', '--boot-from', 'disk', '--conf', '../noemu.conf'] boot_from: disk workdir: ./xen-baremetal-work tftpdir: /home/gson/anita/xen-tests/xen-baremetal-work service ['/usr/sbin/inetd', '-d', './xen-baremetal-work/inetd.conf'] pid 1893 ilo3_power True power on status=0 status_tag=COMMAND COMPLETED Fri Mar 31 23:51:23 2017 Server powering on ....... connected >> NetBSD/x86 BIOS Boot, Revision 5.10 (from NetBSD 7.1) >> Memory: 637/3668992 k 1. Xen 2. Boot normally 3. Boot single user 4. Disable ACPI 5. Disable ACPI and SMP 6. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-\|/-\1797400|/-\|/-\|/-\|/-\|/-\|/-\|/+348904-\|/-\|/-\|/-\|/-\|/-\|/-\=0x20c0c0 |/-\|/-\|/-\|/-\Loading /netbsd-XEN3_DOM0.gz |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ __ __ _ _ ____ ____ \ \/ /___ _ __ | || | |___ \ | ___| \ // _ \ '_ \ | || |_ __) | |___ \ / \ __/ | | | |__ _| / __/ _ ___) | /_/\_\___|_| |_| |_|(_)_____(_)____/ (XEN) Xen version 4.2.5 (root@) (gcc (nb2 20150115) 4.8.5) Fri Mar 31 22:15:16 UTC 2017 (XEN) Latest ChangeSet: unavailable (XEN) Bootloader: unknown (XEN) Command line: dom0_mem=256M console=com1 com1=9600,8n1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f400 (usable) (XEN) 000000000009f400 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000df62f000 (usable) (XEN) 00000000df62f000 - 00000000df63c000 (ACPI data) (XEN) 00000000df63c000 - 00000000df63d000 (usable) (XEN) 00000000df63d000 - 00000000e4000000 (reserved) (XEN) 00000000fec00000 - 00000000fee10000 (reserved) (XEN) 00000000ff800000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000c1ffff000 (usable) (XEN) ACPI: RSDP 000F4F00, 0024 (r2 HP ) (XEN) ACPI: XSDT DF630140, 00B4 (r1 HP ProLiant 2 Ò 162E) (XEN) ACPI: FACP DF630240, 00F4 (r3 HP ProLiant 2 Ò 162E) (XEN) ACPI: DSDT DF630340, 20BD (r1 HP DSDT 1 INTL 20030228) (XEN) ACPI: FACS DF62F100, 0040 (XEN) ACPI: SPCR DF62F140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) (XEN) ACPI: MCFG DF62F1C0, 003C (r1 HP ProLiant 1 0) (XEN) ACPI: HPET DF62F200, 0038 (r1 HP ProLiant 2 Ò 162E) (XEN) ACPI: FFFF DF62F240, 0064 (r2 HP ProLiant 2 Ò 162E) (XEN) ACPI: SPMI DF62F2C0, 0040 (r5 HP ProLiant 1 Ò 162E) (XEN) ACPI: ERST DF62F300, 01D0 (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: APIC DF62F500, 015E (r1 HP ProLiant 2 0) (XEN) ACPI: SRAT DF62F680, 0570 (r1 HP Proliant 1 Ò 162E) (XEN) ACPI: FFFF DF62FC00, 0176 (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: BERT DF62FD80, 0030 (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: HEST DF62FDC0, 00BC (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: DMAR DF62FE80, 013C (r1 HP ProLiant 1 Ò 162E) (XEN) ACPI: SSDT DF632400, 0125 (r3 HP CRSPCI0 2 HP 1) (XEN) ACPI: SSDT DF632540, 01CF (r3 HP riser1a 2 INTL 20061109) (XEN) ACPI: SSDT DF632740, 03BB (r1 HP pcc 1 INTL 20090625) (XEN) ACPI: SSDT DF632B00, 0377 (r1 HP pmab 1 INTL 20090625) (XEN) ACPI: SSDT DF632E80, 4104 (r1 INTEL PPM RCM 1 INTL 20061109) (XEN) System RAM: 49141MB (50321208kB) (XEN) SRAT: PXM 0 -> APIC 0 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 1 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 2 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 3 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 4 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 5 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 16 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 17 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 18 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 19 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 20 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 21 -> Node 0 (XEN) SRAT: PXM 1 -> APIC 32 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 33 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 34 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 35 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 36 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 37 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 48 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 49 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 50 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 51 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 52 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 53 -> Node 1 (XEN) SRAT: Node 0 PXM 0 0-e0000000 (XEN) SRAT: Node 0 PXM 0 100000000-620000000 (XEN) SRAT: Node 1 PXM 1 620000000-c20000000 (XEN) NUMA: Allocated memnodemap from c1fff9000 - c1fffa000 (XEN) NUMA: Using 17 for the hash shift. (XEN) Domain heap initialised DMA width 32 bits (XEN) found SMP MP-table at 000f4f80 (XEN) DMI 2.7 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x908 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[904,0], pm1x_evt[900,0] (XEN) ACPI: wakeup_vec[df62f10c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled) (XEN) Processor #32 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) (XEN) Processor #16 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled) (XEN) Processor #48 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled) (XEN) Processor #36 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) (XEN) Processor #20 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled) (XEN) Processor #52 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled) (XEN) Processor #34 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) (XEN) Processor #18 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled) (XEN) Processor #50 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled) (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled) (XEN) Processor #33 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) (XEN) Processor #17 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled) (XEN) Processor #49 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) (XEN) Processor #37 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled) (XEN) Processor #21 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled) (XEN) Processor #53 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled) (XEN) Processor #35 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) (XEN) Processor #19 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled) (XEN) Processor #51 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) Overriding APIC driver with bigsmp (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) Failed to get Error Log Address Range. (XEN) HEST: Table parsing has been initialized (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 32 CPUs (8 hotplug CPUs) (XEN) IRQ limits: 48 GSI, 4576 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3066.831 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:1246: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 3f (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-3f (XEN) [VT-D]Disabling IOMMU due to Intel 5500/5520/X58 Chipset errata #47, #53 (XEN) I/O virtualisation disabled (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Defaulting to alternative key handling; send 'A' to switch to normal mode. (XEN) Allocated console ring of 256 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) Brought up 24 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80000000 memsz=0xe34000 (XEN) elf_parse_binary: memory: 0xffffffff80000000 -> 0xffffffff80e34000 (XEN) elf_xen_parse: __xen_guest: "GUEST_OS=NetBSD,GUEST_VER=4.99,XEN_VER=xen-3.0,LOADER=generic,VIRT_BASE=0xffffffff80000000,ELF_PADDR_OFFSET=0xffffffff80000000,VIRT_ENTRY=0xffffffff80100000,HYPERCALL_PAGE=0x00000101,BSD_SYMTAB=yes" (XEN) elf_xen_parse_guest_info: GUEST_OS="NetBSD" (XEN) elf_xen_parse_guest_info: GUEST_VER="4.99" (XEN) elf_xen_parse_guest_info: XEN_VER="xen-3.0" (XEN) elf_xen_parse_guest_info: LOADER="generic" (XEN) elf_xen_parse_guest_info: VIRT_BASE="0xffffffff80000000" (XEN) elf_xen_parse_guest_info: ELF_PADDR_OFFSET="0xffffffff80000000" (XEN) elf_xen_parse_guest_info: VIRT_ENTRY="0xffffffff80100000" (XEN) elf_xen_parse_guest_info: HYPERCALL_PAGE="0x00000101" (XEN) elf_xen_parse_guest_info: BSD_SYMTAB="yes" (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80000000 (XEN) virt_kend = 0xffffffff80f64640 (XEN) virt_entry = 0xffffffff80100000 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80000000 -> 0xffffffff80e34000 (XEN) Dom0 symbol map 0xffffffff80e34000 -> 0xffffffff80f64640 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000c00000000->0000000c02000000 (57344 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80000000->ffffffff80f64640 (XEN) Init. ramdisk: ffffffff80f65000->ffffffff80f65000 (XEN) Phys-Mach map: ffffffff80f65000->ffffffff80fe5000 (XEN) Start info: ffffffff80fe5000->ffffffff80fe54b4 (XEN) Page tables: ffffffff80fe6000->ffffffff80ff3000 (XEN) Boot stack: ffffffff80ff3000->ffffffff80ff4000 (XEN) TOTAL: ffffffff80000000->ffffffff81400000 (XEN) ENTRY ADDRESS: ffffffff80100000 (XEN) Dom0 has maximum 24 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80000000 -> 0xffffffff80c7f7f8 (XEN) elf_load_bsdsyms: shdr 28 at 0xffff830c1fccf70d -> 0xffffffff80e34808 (XEN) elf_load_bsdsyms: shdr 29 at 0xffff830c1fcd0080 -> 0xffffffff80e349b8 (XEN) elf_load_bsdsyms: shdr 30 at 0xffff830c1fd86630 -> 0xffffffff80eeaf68 (XEN) Scrubbing Free RAM: .....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 240kB init memory. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.1 (XEN3_DOM0.201703111743Z) total memory = 256 MB avail memory = 232 MB kern.module.path=/stand/amd64/7.1/modules mainbus0 (root) ACPI: RSDP 0xf4f00 000024 (v02 HP ) ACPI: XSDT 0xdf630140 0000B4 (v01 HP ProLiant 00000002 ?? 0000162E) ACPI: FACP 0xdf630240 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716) ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20131218/tbfadt-716) ACPI: DSDT 0xdf630340 0020BD (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 0xdf62f100 000040 ACPI: SPCR 0xdf62f140 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E) ACPI: MCFG 0xdf62f1c0 00003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 0xdf62f200 000038 (v01 HP ProLiant 00000002 ?? 0000162E) ACPI: FFFF 0xdf62f240 000064 (v02 HP ProLiant 00000002 ?? 0000162E) ACPI: SPMI 0xdf62f2c0 000040 (v05 HP ProLiant 00000001 ?? 0000162E) ACPI: ERST 0xdf62f300 0001D0 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: APIC 0xdf62f500 00015E (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 0xdf62f680 000570 (v01 HP Proliant 00000001 ?? 0000162E) ACPI: FFFF 0xdf62fc00 000176 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: BERT 0xdf62fd80 000030 (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: HEST 0xdf62fdc0 0000BC (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: XMAR 0xdf62fe80 00013C (v01 HP ProLiant 00000001 ?? 0000162E) ACPI: SSDT 0xdf632400 000125 (v03 HP CRSPCI0 00000002 HP 00000001) ACPI: SSDT 0xdf632540 0001CF (v03 HP riser1a 00000002 INTL 20061109) ACPI: SSDT 0xdf632740 0003BB (v01 HP pcc 00000001 INTL 20090625) ACPI: SSDT 0xdf632b00 000377 (v01 HP pmab 00000001 INTL 20090625) ACPI: SSDT 0xdf632e80 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109) ACPI: All ACPI Tables successfully acquired ioapic0 at mainbus0 apid 8 (XEN) io_apic.c:2390: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000100f0 (XEN) ioapic_guest_write: old_entry=00010000 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2390: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000100f0 (XEN) ioapic_guest_write: old_entry=000000f0 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1879: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2390: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000100f1 (XEN) ioapic_guest_write: old_entry=000000f1 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1879: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1879: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector 98 for irq 16 (XEN) irq.c:1879: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector a0 for irq 17 (XEN) irq.c:1879: dom0: pirq 0 or irq 17 already mapped (XEN) allocated vector a8 for irq 18 (XEN) irq.c:1879: dom0: pirq 0 or irq 18 already mapped (XEN) allocated vector b0 for irq 19 (XEN) irq.c:1879: dom0: pirq 0 or irq 19 already mapped (XEN) allocated vector b8 for irq 20 (XEN) irq.c:1879: dom0: pirq 0 or irq 20 already mapped (XEN) allocated vector c0 for irq 21 (XEN) irq.c:1879: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector c8 for irq 22 (XEN) irq.c:1879: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector d0 for irq 23 (XEN) irq.c:1879: dom0: pirq 0 or irq 23 already mapped ioapic1 at mainbus0 apid 0 (XEN) allocated vector d8 for irq 24 (XEN) irq.c:1879: dom0: pirq 0 or irq 24 already mapped (XEN) allocated vector 21 for irq 25 (XEN) irq.c:1879: dom0: pirq 0 or irq 25 already mapped (XEN) allocated vector 29 for irq 26 (XEN) irq.c:1879: dom0: pirq 0 or irq 26 already mapped (XEN) allocated vector 31 for irq 27 (XEN) irq.c:1879: dom0: pirq 0 or irq 27 already mapped (XEN) allocated vector 39 for irq 28 (XEN) irq.c:1879: dom0: pirq 0 or irq 28 already mapped (XEN) allocated vector 41 for irq 29 (XEN) irq.c:1879: dom0: pirq 0 or irq 29 already mapped (XEN) allocated vector 49 for irq 30 (XEN) irq.c:1879: dom0: pirq 0 or irq 30 already mapped (XEN) allocated vector 51 for irq 31 (XEN) irq.c:1879: dom0: pirq 0 or irq 31 already mapped (XEN) allocated vector 59 for irq 32 (XEN) irq.c:1879: dom0: pirq 0 or irq 32 already mapped (XEN) allocated vector 61 for irq 33 (XEN) irq.c:1879: dom0: pirq 0 or irq 33 already mapped (XEN) allocated vector 69 for irq 34 (XEN) irq.c:1879: dom0: pirq 0 or irq 34 already mapped (XEN) allocated vector 71 for irq 35 (XEN) irq.c:1879: dom0: pirq 0 or irq 35 already mapped (XEN) allocated vector 79 for irq 36 (XEN) irq.c:1879: dom0: pirq 0 or irq 36 already mapped (XEN) allocated vector 81 for irq 37 (XEN) irq.c:1879: dom0: pirq 0 or irq 37 already mapped (XEN) allocated vector 89 for irq 38 (XEN) irq.c:1879: dom0: pirq 0 or irq 38 already mapped (XEN) allocated vector 91 for irq 39 (XEN) irq.c:1879: dom0: pirq 0 or irq 39 already mapped (XEN) allocated vector 99 for irq 40 (XEN) irq.c:1879: dom0: pirq 0 or irq 40 already mapped (XEN) allocated vector a1 for irq 41 (XEN) irq.c:1879: dom0: pirq 0 or irq 41 already mapped (XEN) allocated vector a9 for irq 42 (XEN) irq.c:1879: dom0: pirq 0 or irq 42 already mapped (XEN) allocated vector b1 for irq 43 (XEN) irq.c:1879: dom0: pirq 0 or irq 43 already mapped (XEN) allocated vector b9 for irq 44 (XEN) irq.c:1879: dom0: pirq 0 or irq 44 already mapped (XEN) allocated vector c1 for irq 45 (XEN) irq.c:1879: dom0: pirq 0 or irq 45 already mapped (XEN) allocated vector c9 for irq 46 (XEN) irq.c:1879: dom0: pirq 0 or irq 46 already mapped (XEN) allocated vector d1 for irq 47 (XEN) irq.c:1879: dom0: pirq 0 or irq 47 already mapped cpu0 at mainbus0 apid 0 cpu1 at mainbus0 apid 32 cpu2 at mainbus0 apid 16 cpu3 at mainbus0 apid 48 cpu4 at mainbus0 apid 4 cpu5 at mainbus0 apid 36 cpu6 at mainbus0 apid 20 cpu7 at mainbus0 apid 52 cpu8 at mainbus0 apid 2 cpu9 at mainbus0 apid 34 cpu10 at mainbus0 apid 18 cpu11 at mainbus0 apid 50 cpu12 at mainbus0 apid 1 cpu13 at mainbus0 apid 33 cpu14 at mainbus0 apid 17 cpu15 at mainbus0 apid 49 cpu16 at mainbus0 apid 5 cpu17 at mainbus0 apid 37 cpu18 at mainbus0 apid 21 cpu19 at mainbus0 apid 53 cpu20 at mainbus0 apid 3 cpu21 at mainbus0 apid 35 cpu22 at mainbus0 apid 19 cpu23 at mainbus0 apid 51 ipmi0 at mainbus0 hypervisor0 at mainbus0: Xen version 4.2.5 vcpu0 at hypervisor0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, id 0x206c2 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver acpi0 at hypervisor0: Intel ACPICA 20131218 MOMB (PNP0C02) at acpi0 not configured MI0 (IPI0001) at acpi0 not configured TIME (PNP0100) at acpi0 not configured HPET (PNP0103) at acpi0 not configured pcppi0 at acpi0 (BEEP, PNP0800): io 0x61 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 COMA (PNP0501) at acpi0 not configured PMI0 (ACPI000D) at acpi0 not configured acpitz0 at acpi0 (THM0): vcpu0 ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646) pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at hypervisor0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13) ppb0: PCI Express capability version 2 x4 @ 5.0GT/s pci1 at ppb0 bus 5 ciss0 at pci1 dev 0 function 0: HP Smart Array 11 ciss0: interrupting at ioapic1 pin 4, event channel 6 ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro scsibus0 at ciss0: 1 target, 1 lun per target ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3409 (rev. 0x13) ppb1: PCI Express capability version 2 x4 @ 5.0GT/s pci2 at ppb1 bus 12 ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13) ppb2: PCI Express capability version 2 x16 @ 5.0GT/s pci3 at ppb2 bus 9 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13) ppb3: PCI Express capability version 2 x4 @ 5.0GT/s pci4 at ppb3 bus 13 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13) ppb4: PCI Express capability version 2 x4 @ 5.0GT/s pci5 at ppb4 bus 14 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13) ppb5: PCI Express capability version 2 x4 @ 5.0GT/s pci6 at ppb5 bus 15 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13) ppb6: PCI Express capability version 2 x4 @ 5.0GT/s ppb6: link is x4 @ 2.5GT/s pci7 at ppb6 bus 3 bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx0: Ethernet address e4:11:5b:d3:13:fc bnx0: interrupting at ioapic1 pin 6, event channel 7 bnx0: ASIC BCM5709 C0 (0x57092003) bnx0: PCIe x4 2.5Gbps bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx1: Ethernet address e4:11:5b:d3:13:fe bnx1: interrupting at ioapic1 pin 13, event channel 8 bnx1: ASIC BCM5709 C0 (0x57092003) bnx1: PCIe x4 2.5Gbps bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 8 function 0: vendor 0x8086 product 0x340f (rev. 0x13) ppb7: PCI Express capability version 2 x4 @ 5.0GT/s ppb7: link is x4 @ 2.5GT/s pci8 at ppb7 bus 4 bnx2 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T bnx2: Ethernet address e4:11:5b:d3:13:a4 bnx2: interrupting at ioapic1 pin 7, event channel 9 bnx2: ASIC BCM5709 C0 (0x57092003) bnx2: PCIe x4 2.5Gbps bnx2: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bnx3 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T bnx3: Ethernet address e4:11:5b:d3:13:a6 bnx3: interrupting at ioapic1 pin 15, event channel 10 bnx3: ASIC BCM5709 C0 (0x57092003) bnx3: PCIe x4 2.5Gbps bnx3: Coal (RX:6,6,18,18; TX:20,20,80,80) brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb8 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13) ppb8: PCI Express capability version 2 x8 @ 5.0GT/s pci9 at ppb8 bus 6 ppb9 at pci0 dev 10 function 0: vendor 0x8086 product 0x3411 (rev. 0x13) ppb9: PCI Express capability version 2 x4 @ 5.0GT/s pci10 at ppb9 bus 16 pchb1 at pci0 dev 13 function 0: vendor 0x8086 product 0x343a (rev. 0x13) pchb2 at pci0 dev 13 function 1: vendor 0x8086 product 0x343b (rev. 0x13) pchb3 at pci0 dev 13 function 2: vendor 0x8086 product 0x343c (rev. 0x13) pchb4 at pci0 dev 13 function 3: vendor 0x8086 product 0x343d (rev. 0x13) pchb5 at pci0 dev 13 function 4: vendor 0x8086 product 0x3418 (rev. 0x13) pchb6 at pci0 dev 13 function 5: vendor 0x8086 product 0x3419 (rev. 0x13) pchb7 at pci0 dev 13 function 6: vendor 0x8086 product 0x341a (rev. 0x13) pchb8 at pci0 dev 14 function 0: vendor 0x8086 product 0x341c (rev. 0x13) pchb9 at pci0 dev 14 function 1: vendor 0x8086 product 0x341d (rev. 0x13) pchb10 at pci0 dev 14 function 2: vendor 0x8086 product 0x341e (rev. 0x13) pchb11 at pci0 dev 14 function 3: vendor 0x8086 product 0x341f (rev. 0x13) pchb12 at pci0 dev 14 function 4: vendor 0x8086 product 0x3439 (rev. 0x13) vendor 0x8086 product 0x342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured vendor 0x8086 product 0x3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00) ppb10: PCI Express capability version 1 x4 @ 2.5GT/s pci11 at ppb10 bus 17 ppb11 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00) ppb11: PCI Express capability version 1 x1 @ 2.5GT/s pci12 at ppb11 bus 2 vendor 0x103c product 0x3306 (miscellaneous system, revision 0x04) at pci12 dev 0 function 0 not configured vendor 0x103c product 0x3307 (miscellaneous system, revision 0x04) at pci12 dev 0 function 2 not configured uhci0 at pci12 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x01) uhci0: interrupting at ioapic0 pin 17, event channel 11 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00) uhci1: interrupting at ioapic0 pin 20, event channel 12 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00) uhci2: interrupting at ioapic0 pin 23, event channel 13 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00) uhci3: interrupting at ioapic0 pin 22, event channel 14 usb3 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 3: vendor 0x8086 product 0x3a39 (rev. 0x00) uhci4: interrupting at ioapic0 pin 23, event channel 13 usb4 at uhci4: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00) ehci0: interrupting at ioapic0 pin 20, event channel 12 ehci0: companion controllers, 2 ports each: uhci1 uhci2 uhci3 uhci4 usb5 at ehci0: USB revision 2.0 ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90) pci13 at ppb12 bus 1 vga0 at pci13 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 pckbd_enable: command error drm at vga0 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a18 (rev. 0x00) ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. isa0 at ichlpcib0 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb0: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 279 GB, 65535 cyl, 255 head, 35 sec, 512 bytes/sect x 585871964 sectors sd0: async, 8-bit transfers, tagged queueing uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 uhidev1 at uhub0 port 1 configuration 1 interface 1 uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 boot device: sd0 root on sd0a dumps on sd0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs ugen0 at uhub2 port 2 ugen0: Araneus Alea II TRNG, rev 2.00/2.04, addr 2 Fri Mar 31 22:55:47 UTC 2017 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: random_seed: /var/db/entropy-file: Not present Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: anita-test.netbsd.org IPv6 mode: host Configuring network interfaces: bnx0. Adding interface aliases:. add net default: gateway 10.169.0.1 Waiting for DAD completion for statically configured addresses... Building databases: dev, utmp, utmpx. Starting syslogd. Mounting all file systems... Clearing temporary files. Updating fontconfig cache: done. Checking quotas: done. swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting xenservices: xenstored, xenconsoled. Mar 31 22:55:53 anita-test xenstored: Checking store ... Mar 31 22:55:53 anita-test xenstored: Checking store complete. balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 262144 KiB Setting domain 0 name... /etc/rc.d/xendomains exited with code 1 Starting local daemons:. Updating motd. Starting powerd. Starting sshd. Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/xendomains See /var/run/rc.log for more information. Fri Mar 31 22:56:01 UTC 2017 NetBSD/amd64 (anita-test.netbsd.org) (console) login: NetBSD/amd64 (anita-test.netbsd.org) (console) login: root root Mar 31 22:56:03 anita-test login: ROOT LOGIN (root) on tty console Last login: Fri Mar 31 20:33:14 2017 on console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.1 (XEN3_DOM0.201703111743Z) Welcome to NetBSD!  H H H H H H H H HTerminal type is vt100. We recommend that you create a non-root account and use su(1) for root access. anita-test# exec /bin/sh exec /bin/sh anita-test# PS1='anita-root-shell-pr''ompt-1491000722.8# ' PS1='anita-root-shell-pr''ompt-1491000722.8# ' anita-root-shell-prompt-1491000722.8# set -x && ( echo get img | tftp 10.169.0.1 ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && cat /mnt/test-xen.sh && sh /mnt/test-xen.sh set -x && ( echo get img | tftp 10.169.0.1  ) && vnconfig vnd0 img && mount /dev/vnd0a /mnt && cat /mnt/test-xen.sh && sh / mnt/test-xen.sh + echo get img + tftp '10.169.0.1' tftp> Received 1048771 bytes in 0.3 seconds tftp> + vnconfig vnd0 img + mount /dev/vnd0a /mnt + cat '/mnt/test-xen.sh' set -ex echo "this is test-xen.sh" netstat -rn -f inet sleep 30 netstat -rn -f inet export PKG_PATH=ftp://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/7.0/All pkg_add py27-anita ( cd /dev sh MAKEDEV vnd4 || true sh MAKEDEV vnd5 || true sh MAKEDEV vnd6 || true sh MAKEDEV vnd7 || true sh MAKEDEV vnd8 || true sh MAKEDEV vnd9 || true sh MAKEDEV vnd10 || true sh MAKEDEV vnd11 || true ) for url in http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/ http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/ http://mirror.araneus.fi/local/2017.03.30.09.16.53/release/amd64/ do ( ver=$(/usr/pkg/bin/python2.7 /mnt/url2ver.py $url) sleep 10 echo "begin" "test of $ver" date sleep 10 anita --vmm=xl --sets kern-GENERIC,modules,base,etc,comp,text,tests test $url >$ver.log 2>&1 || true echo "put $ver.log" | tftp 10.169.0.1 sleep 10 echo "end" "test of $ver" date sleep 10 ) & done wait + sh '/mnt/test-xen.sh' + echo 'this is test-xen.sh' this is test-xen.sh + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS - - - bnx0 10.169.0/24 link#1 UC - - - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc - - - bnx0 127/8 127.0.0.1 UGRS - - 33648 lo0 127.0.0.1 127.0.0.1 UH - - 33648 lo0 + sleep 30 + netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Interface default 10.169.0.1 UGS - - - bnx0 10.169.0/24 link#1 UC - - - bnx0 10.169.0.1 00:50:fc:fb:10:45 UHLc - - - bnx0 127/8 127.0.0.1 UGRS - - 33648 lo0 127.0.0.1 127.0.0.1 UH - - 33648 lo0 + export 'PKG_PATH=ftp://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/7.0/All' + 'pkg_add' py27-anita pkg_add: Warning: package `py27-anita-1.40nb1' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) pkg_add: Warning: package `cdrtools-3.01nb1' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) cdrtools-3.01nb1: copying /usr/pkg/share/examples/cdrtools/cdrecord to /usr/pkg/etc/cdrecord.conf =========================================================================== $NetBSD: MESSAGE.cdrecord.conf,v 1.1.1.1 2006/01/05 23:27:59 wiz Exp $ Note: The location of the cdrtools-3.01 `defaults' file has been set to /usr/pkg/etc/cdrecord.conf This is the pkgsrc standard config file location, NOT the cdrtools-3.01 standard location, which is /etc/default/cdrecord. The reason for this is that pkgsrc packages should not use configuration files outside /usr/pkg unless they are explicitly set by the user. =========================================================================== pkg_add: Warning: package `py27-pexpect-3.0' was built for a platform: pkg_add: NetBSD/x86_64 7.0 (pkg) vs. NetBSD/x86_64 7.1 (this host) + cd /dev + sh MAKEDEV vnd4 + sh MAKEDEV vnd5 + sh MAKEDEV vnd6 + sh MAKEDEV vnd7 + sh MAKEDEV vnd8 + sh MAKEDEV vnd9 + sh MAKEDEV vnd10 + sh MAKEDEV vnd11 + wait + '/usr/pkg/bin/python2.7' '/mnt/url2ver.py' 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/' + '/usr/pkg/bin/python2.7' '/mnt/url2ver.py' 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/' + '/usr/pkg/bin/python2.7' '/mnt/url2ver.py' 'http://mirror.araneus.fi/local/2017.03.30.09.16.53/release/amd64/' + 'ver=current-2017.03.30.09.16.53' + sleep 10 + 'ver=7.1' + sleep 10 + 'ver=6.1.5' + sleep 10 + echo begin 'test of current-2017.03.30.09.16.53' begin test of current-2017.03.30.09.16.53 + date + echo begin 'test of 7.1' begin test of 7.1 + date + echo begin 'test of 6.1.5' begin test of 6.1.5 + date Fri Mar 31 22:57:18 UTC 2017 + sleep 10 Fri Mar 31 22:57:18 UTC 2017 + sleep 10 Fri Mar 31 22:57:18 UTC 2017 + sleep 10 + anita --vmm=xl --sets 'kern-GENERIC,modules,base,etc,comp,text,tests' test 'http://mirror.araneus.fi/local/2017.03.30.09.16.53/release/amd64/' + anita --vmm=xl --sets 'kern-GENERIC,modules,base,etc,comp,text,tests' test 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-7.1/amd64/' + anita --vmm=xl --sets 'kern-GENERIC,modules,base,etc,comp,text,tests' test 'http://mirror.araneus.fi/ftp.netbsd.org/pub/NetBSD/NetBSD-6.1.5/amd64/' balloon0: current reservation: 65536 pages => target: 65536 pages xbd backend: attach device vnd1d (size 443708) for domain 1 xbd backend: attach device vnd2d (size 3145728) for domain 1 xbd backend: attach device vnd3d (size 3145728) for domain 2 xbd backend: attach device vnd4d (size 537652) for domain 2 xbd backend: attach device vnd5d (size 3145728) for domain 3 xbd backend: attach device vnd6d (size 917220) for domain 3 (XEN) grant_table.c:278:d0 Increased maptrack size to 2 frames xbd backend: detach device vnd3d for domain 2 xbd backend: detach device vnd4d for domain 2 xbd backend: attach device vnd3d (size 204800) for domain 4 xbd backend: attach device vnd4d (size 3145728) for domain 4 xbd backend: detach device vnd2d for domain 1 xbd backend: detach device vnd1d for domain 1 xbd backend: attach device vnd1d (size 3145728) for domain 5 xbd backend: attach device vnd2d (size 204800) for domain 5 xbd backend: detach device vnd5d for domain 3 xbd backend: detach device vnd6d for domain 3 xbd backend: attach device vnd5d (size 3145728) for domain 6 xbd backend: attach device vnd6d (size 204800) for domain 6 xbd backend: detach device vnd2d for domain 5 xbd backend: detach device vnd1d for domain 5 + true + echo 'put 6.1.5.log' + tftp '10.169.0.1' tftp> Sent 244414 bytes in 0.1 seconds tftp> + sleep 10 + echo end 'test of 6.1.5' end test of 6.1.5 + date Sat Apr 1 00:09:10 UTC 2017 + sleep 10 xbd backend: detach device vnd3d for domain 4 xbd backend: detach device vnd4d for domain 4 + true + echo 'put 7.1.log' + tftp '10.169.0.1' tftp> Sent 343574 bytes in 0.1 seconds tftp> + sleep 10 + echo end 'test of 7.1' end test of 7.1 + date Sat Apr 1 00:41:03 UTC 2017 + sleep 10 xbd backend: detach device vnd6d for domain 6 xbd backend: detach device vnd5d for domain 6 + true + echo 'put current-2017.03.30.09.16.53.log' + tftp '10.169.0.1' tftp> Sent 421905 bytes in 0.0 seconds tftp> + sleep 10 + echo end 'test of current-2017.03.30.09.16.53' end test of current-2017.03.30.09.16.53 + date Sat Apr 1 01:24:15 UTC 2017 + sleep 10 anita-root-shell-prompt-1491000722.8# echo exit_status=$?= echo exit_status=$?= + echo 'exit_status=0=' exit_status=0= anita-root-shell-prompt-1491000722.8# halt halt + halt Apr 1 01:24:26 anita-test halt: halted by root Apr 1 01:24:26 anita-test syslogd[180]: Exiting on signal 15 syncing disks... done brgphy3: detached brgphy2: detached brgphy1: detached brgphy0: detached com1: detached bnx3: detached bnx2: detached bnx1: detached bnx0: detached pci11: detached pci10: detached pci9: detached pci8: detached pci7: detached pci6: detached pci5: detached pci4: detached pci3: detached pci2: detached ppb10: detached pchb12: detached pchb11: detached pchb10: detached pchb9: detached pchb8: detached pchb7: detached pchb6: detached pchb5: detached pchb4: detached pchb3: detached pchb2: detached pchb1: detached ppb9: detached ppb8: detached ppb7: detached ppb6: detached ppb5: detached ppb4: detached ppb3: detached ppb2: detached ppb1: detached pchb0: detached vnd6: detached vnd5: detached vnd4: detached vnd3: detached vnd2: detached vnd1: detached vnd0: detached sd0: detached scsibus0: detached The operating system has halted. Pleas