Looking for valid bootloader image.... Jumping to start of image at address 0xbfc80000 U-Boot 1.1.1 (UBNT Build ID: 4670715-gbd7e2d7) (Build time: May 27 2014 - 11:16:22) BIST check passed. UBNT_E100 r1:2, r2:18, f:4/71, serial #: 44D9E79EF4C6 MPR 13-00318-18 Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate) DRAM: 512 MB Clearing DRAM....... done Flash: 4 MB Net: octeth0, octeth1, octeth2 USB: (port 0) scanning bus for devices... 1 USB Devices found scanning bus for storage devices... Device 0: Vendor: Kingston Prod.: DataTraveler SE9 Rev: PMAP Type: Removable Hard Disk Capacity: 7548.0 MB = 7.3 GB (15458304 x 512) 0 reading netbsd ..................................... 7523616 bytes read argv[2]: coremask=0x3 argv[3]: root=wedge:octeon-root ELF file is 64 bit Allocating memory for ELF segment: addr: 0xffffffff80200000 (adjusted to: 0x200000), size 0x642820 Allocated memory for ELF segment: addr: 0xffffffff80200000, size 0x642820 Processing PHDR 1 Loading 618010 bytes at ffffffff80200000 Clearing 2a810 bytes at ffffffff80818010 ## Loading Linux kernel with entry point: 0xffffffff80200000 ... Bootloader: Done loading app on coremask: 0x3 [ 1.0000000] MIPS32/64 params: cpu arch: 256 [ 1.0000000] MIPS32/64 params: TLB entries: 64 [ 1.0000000] MIPS32/64 params: Icache: line=128, total=32768, ways=4, sets=64, colors=1 [ 1.0000000] MIPS32/64 params: Dcache: line=128, total=16384, ways=64, sets=2, colors=0 [ 1.0000000] MIPS32/64 params: SDcache: line=128, total=131072, ways=8, sets=128, colors=2 [ 1.0000000] Dcache is coherent [ 1.0000000] u-boot bootmem desc @ 0x24108 version 3.0 [ 1.0000000] phys segment: 0xfc000 @ 0x102000 [ 1.0000000] adding 0xfc000 @ 0x102000 to freelist 3 [ 1.0000000] phys segment: 0x78bc000 @ 0x844000 [ 1.0000000] adding 0x78bc000 @ 0x844000 to freelist 3 [ 1.0000000] phys segment: 0x7efa000 @ 0x8102000 [ 1.0000000] adding 0x7efa000 @ 0x8102000 to freelist 3 [ 1.0000000] phys segment: 0xff00000 @ 0x410000000 [ 1.0000000] adding 0xff00000 @ 0x410000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.12 (OCTEON) #0: Sat Mar 29 19:40:42 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbmips/compile/OCTEON [ 1.0000000] Cavium Octeon CN5020-500 [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 495 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpunode0 at mainbus0: 2 cores, crypto+kasumi, 64bit-mul, unaligned-access ok [ 1.0000000] cpu0 at cpunode0 core 0: 500.00MHz [ 1.0000000] cpu0: Cavium CN5020-500 (0xd0601) Rev. 1 with software emulated floating point [ 1.0000000] cpu0: 64 TLB entries, 512TB (49-bit) VAs, 512TB (49-bit) PAs, 256MB max page size [ 1.0000000] cpu0: 32KB/128B 4-way set-associative L1 instruction cache [ 1.0000000] cpu0: 16KB/128B 64-way set-associative write-through coherent L1 data cache [ 1.0000000] cpu0: 128KB/128B 8-way set-associative write-back L2 unified cache [ 1.0000000] cpu1 at cpunode0 core 1: disabled (uniprocessor kernel) [ 1.0000000] wdog0 at cpunode0: default period is 4 seconds [ 1.0000000] iobus0 at mainbus0 [ 1.0000000] iobus0: initializing POW [ 1.0000000] iobus0: initializing FPA [ 1.0000000] com0 at iobus0 address 0x0001180000000800: ns16650, no ERS, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] com at iobus0 address 0x0001180000000c00 not configured [ 1.0000000] octrnm0 at iobus0 address 0x0001180040000000 [ 1.0000000] entropy: ready [ 1.0000000] octtwsi at iobus0 address 0x0001180000001000 not configured [ 1.0000000] octmpi at iobus0 address 0x0001070000001000 not configured [ 1.0000000] octsmi0 at iobus0 address 0x0001180000001800 [ 1.0000000] octpip0 at iobus0 address 0x00011800a0000000 [ 1.0000000] octgmx0 at octpip0 [ 1.0000000] cnmac0 at octgmx0: address=0x1180008000000: RGMII [ 1.0000000] cnmac0: Ethernet address 44:d9:e7:9e:f4:c6 [ 1.0000000] atphy0 at cnmac0 phy 7: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] cnmac1 at octgmx0: address=0x1180008000000: RGMII [ 1.0000000] cnmac1: Ethernet address 44:d9:e7:9e:f4:c7 [ 1.0000000] atphy1 at cnmac1 phy 6: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] cnmac2 at octgmx0: address=0x1180008000000: RGMII [ 1.0000000] cnmac2: Ethernet address 44:d9:e7:9e:f4:c8 [ 1.0000000] atphy2 at cnmac2 phy 5: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] dwctwo0 at iobus0 address 0x0001180068000000 [ 1.0000000] usb0 at dwctwo0: USB revision 2.0 [ 1.0000000] bootbus0 at mainbus0 [ 1.0199735] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.6699611] umass0 at uhub0 port 1 configuration 1 interface 0 [ 1.6807622] umass0: Kingston (0x0951) DataTraveler SE9 (0x1689), rev 2.00/1.00, addr 2 [ 1.6899795] scsibus0 at umass0: 2 targets, 1 lun per target [ 1.6899795] uhub0: illegal enable change, port 1 [ 1.7099686] sd0 at scsibus0 target 0 lun 0: disk removable [ 1.7199932] sd0: 7548 MB, 1894 cyl, 255 head, 32 sec, 512 bytes/sect x 15458304 sectors [ 1.7299719] dk0 at sd0: "octeon-boot", 163840 blocks at 32768, type: ntfs [ 1.7421084] dk1 at sd0: "octeon-root", 696320 blocks at 196608, type: ffs [ 1.7421084] swwdog0: software watchdog initialized [ 1.7544430] WARNING: 1 error while detecting hardware; check system log. [ 1.7611110] boot device: sd0 [ 1.7611110] root on dk1 [ 1.7699711] root file system type: ffs [ 1.7822818] kern.module.path=/stand/evbmips/10.99.12/modules [ 1.7915400] WARNING: no TOD clock present [ 1.7915400] WARNING: using filesystem time [ 1.7995905] WARNING: CHECK AND RESET THE DATE! Sat Mar 29 19:40:42 UTC 2025 [1] Segmentation fault /bin/sh -c "ps -p \$\$ -o ppid=" Starting root file system check: /dev/rdk1: file system is clean; not checking gpt: /dev/rsd0: No valid PMBR partition found [ 4.0999612] dk0 at sd0 (octeon-boot) deleted [ 4.1099713] dk0 at sd0: "octeon-boot", 163840 blocks at 32768, type: ntfs [ 4.1099713] dk1 at sd0: "octeon-root", 15253504 blocks at 196608, type: ffs /dev/rsd0: Partition 2 resized: 196608 15253504 Resizing / (NAME=octeon-root) reboot: rebooted by root [ 228.5099591] rebooting... Looking for valid bootloader image.... Jumping to start of image at address 0xbfc80000 U-Boot 1.1.1 (UBNT Build ID: 4670715-gbd7e2d7) (Build time: May 27 2014 - 11:16:22) BIST check passed. UBNT_E100 r1:2, r2:18, f:4/71, serial #: 44D9E79EF4C6 MPR 13-00318-18 Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate) DRAM: 512 MB Clearing DRAM....... done Flash: 4 MB Net: octeth0, octeth1, octeth2 USB: (port 0) scanning bus for devices... 1 USB Devices found scanning bus for storage devices... Device 0: Vendor: Kingston Prod.: DataTraveler SE9 Rev: PMAP Type: Removable Hard Disk Capacity: 7548.0 MB = 7.3 GB (15458304 x 512) 0 reading netbsd ..................................... 7523616 bytes read argv[2]: coremask=0x3 argv[3]: root=wedge:octeon-root ELF file is 64 bit Allocating memory for ELF segment: addr: 0xffffffff80200000 (adjusted to: 0x200000), size 0x642820 Allocated memory for ELF segment: addr: 0xffffffff80200000, size 0x642820 Processing PHDR 1 Loading 618010 bytes at ffffffff80200000 Clearing 2a810 bytes at ffffffff80818010 ## Loading Linux kernel with entry point: 0xffffffff80200000 ... Bootloader: Done loading app on coremask: 0x3 [ 1.0000000] MIPS32/64 params: cpu arch: 256 [ 1.0000000] MIPS32/64 params: TLB entries: 64 [ 1.0000000] MIPS32/64 params: Icache: line=128, total=32768, ways=4, sets=64, colors=1 [ 1.0000000] MIPS32/64 params: Dcache: line=128, total=16384, ways=64, sets=2, colors=0 [ 1.0000000] MIPS32/64 params: SDcache: line=128, total=131072, ways=8, sets=128, colors=2 [ 1.0000000] Dcache is coherent [ 1.0000000] u-boot bootmem desc @ 0x24108 version 3.0 [ 1.0000000] phys segment: 0xfc000 @ 0x102000 [ 1.0000000] adding 0xfc000 @ 0x102000 to freelist 3 [ 1.0000000] phys segment: 0x78bc000 @ 0x844000 [ 1.0000000] adding 0x78bc000 @ 0x844000 to freelist 3 [ 1.0000000] phys segment: 0x7efa000 @ 0x8102000 [ 1.0000000] adding 0x7efa000 @ 0x8102000 to freelist 3 [ 1.0000000] phys segment: 0xff00000 @ 0x410000000 [ 1.0000000] adding 0xff00000 @ 0x410000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.12 (OCTEON) #0: Sat Mar 29 19:40:42 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbmips/compile/OCTEON [ 1.0000000] Cavium Octeon CN5020-500 [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 495 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpunode0 at mainbus0: 2 cores, crypto+kasumi, 64bit-mul, unaligned-access ok [ 1.0000000] cpu0 at cpunode0 core 0: 500.00MHz [ 1.0000000] cpu0: Cavium CN5020-500 (0xd0601) Rev. 1 with software emulated floating point [ 1.0000000] cpu0: 64 TLB entries, 512TB (49-bit) VAs, 512TB (49-bit) PAs, 256MB max page size [ 1.0000000] cpu0: 32KB/128B 4-way set-associative L1 instruction cache [ 1.0000000] cpu0: 16KB/128B 64-way set-associative write-through coherent L1 data cache [ 1.0000000] cpu0: 128KB/128B 8-way set-associative write-back L2 unified cache [ 1.0000000] cpu1 at cpunode0 core 1: disabled (uniprocessor kernel) [ 1.0000000] wdog0 at cpunode0: default period is 4 seconds [ 1.0000000] iobus0 at mainbus0 [ 1.0000000] iobus0: initializing POW [ 1.0000000] iobus0: initializing FPA [ 1.0000000] com0 at iobus0 address 0x0001180000000800: ns16650, no ERS, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] com at iobus0 address 0x0001180000000c00 not configured [ 1.0000000] octrnm0 at iobus0 address 0x0001180040000000 [ 1.0000000] entropy: ready [ 1.0000000] octtwsi at iobus0 address 0x0001180000001000 not configured [ 1.0000000] octmpi at iobus0 address 0x0001070000001000 not configured [ 1.0000000] octsmi0 at iobus0 address 0x0001180000001800 [ 1.0000000] octpip0 at iobus0 address 0x00011800a0000000 [ 1.0000000] octgmx0 at octpip0 [ 1.0000000] cnmac0 at octgmx0: address=0x1180008000000: RGMII [ 1.0000000] cnmac0: Ethernet address 44:d9:e7:9e:f4:c6 [ 1.0000000] atphy0 at cnmac0 phy 7: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] cnmac1 at octgmx0: address=0x1180008000000: RGMII [ 1.0000000] cnmac1: Ethernet address 44:d9:e7:9e:f4:c7 [ 1.0000000] atphy1 at cnmac1 phy 6: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] cnmac2 at octgmx0: address=0x1180008000000: RGMII [ 1.0000000] cnmac2: Ethernet address 44:d9:e7:9e:f4:c8 [ 1.0000000] atphy2 at cnmac2 phy 5: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] dwctwo0 at iobus0 address 0x0001180068000000 [ 1.0000000] usb0 at dwctwo0: USB revision 2.0 [ 1.0000000] bootbus0 at mainbus0 [ 1.0199731] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 4.0599601] umass0 at uhub0 port 1 configuration 1 interface 0 [ 4.0707548] umass0: Kingston (0x0951) DataTraveler SE9 (0x1689), rev 2.00/1.00, addr 2 [ 4.0799720] scsibus0 at umass0: 2 targets, 1 lun per target [ 4.0799720] uhub0: illegal enable change, port 1 [ 6.5599583] sd0 at scsibus0 target 0 lun 0: disk removable [ 6.5703442] sd0: 7548 MB, 1894 cyl, 255 head, 32 sec, 512 bytes/sect x 15458304 sectors [ 6.5799967] dk0 at sd0: "octeon-boot", 163840 blocks at 32768, type: ntfs [ 6.5924687] dk1 at sd0: "octeon-root", 15253504 blocks at 196608, type: ffs [ 6.5999651] swwdog0: software watchdog initialized [ 6.5999651] WARNING: 1 error while detecting hardware; check system log. [ 6.6116598] boot device: sd0 [ 6.6116598] root on dk1 [ 6.6199636] root file system type: ffs [ 6.6329077] kern.module.path=/stand/evbmips/10.99.12/modules [ 6.6422788] WARNING: no TOD clock present [ 6.6422788] WARNING: using filesystem time [ 6.6503459] WARNING: CHECK AND RESET THE DATE! Sat Mar 29 19:40:44 UTC 2025 [1] Segmentation fault /bin/sh -c "ps -p \$\$ -o ppid=" Starting root file system check: /dev/rdk1: file system is clean; not checking Not resizing / (NAME=octeon-root): already correct size mount: /: Segmentation fault Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting file system checks: [1] Segmentation fault fsck -x / ${fsck_flags} Unknown error 139; help! ERROR: ABORTING BOOT (sending SIGTERM to parent)! init: `/bin/sh' Enter pathname of shell or RETURN for /bin/sh: